Welcome to TradeChina
Yellow resistant 100% pure epoxy 2 parts AB glue epoxy resin best wood glue adhesive for furniture
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
Product Description
Epoxy resin for Kitchen/ Washbasin countertop
Epxoy Resin for river table
Crystal photo frame (high gloss)
Back side of crystal photo frame
Crystal photo frame
Epoxy resin 3D floor
Epoxy resin 3D floor
Epoxy Resin table River
Table river making
Key Ring making
Crystal AB glue Table Wood River wholesale adhesive epoxy resin chemical glue
Hard clear Epoxy resin AB glue liquid for crystal floor coating or photo frames
It is widely used in the Table River making , album frame making, album cover making, Home Design Wood Furniture, gifts, fine products, jewelry, signs, badges, buttons, key rings, IC cards, trademarks and other types of flat Epoxy and surface coating, potting and filling, crystal flooring coating, mold filling and art work, etc.
Main traits:.
Color less, Low odor, high grade of transparency, elastic.
Appearance and physical characteristics:
Epoxy resin crystal ab glue | A glue | B glue | |||
Color | Transparent liquid | Transparent liquid | |||
Density(25℃) | 1.12g/cm³ | 0.8g/cm³ | |||
Viscosity(25℃) | 5500-6500cps | 85-95cps | |||
Storage life(25℃) | One year | One year | |||
Quality after curing | Hardness | >86 | |||
Adhesion strength | 135-150（kg/cm2） | ||||
Quality after curing | Bending strength | 200-210（kg/cm2） | |||
Shear strength | 125-135（kg/cm2） | ||||
Heat intensity | 90 | ||||
Mix Ratio | A: B = 3:1 (weight ratio) | ||||
Curing conditions | 25 ° C × 8-12 hours 90° C × 1-1.5 hours | ||||
Available Time | 25°C× 30-40 minutes ( 100g mixture) | ||||
Detailed Images
Epoxy resin crystal AB glue
There are four barrels in one carton.
The white three barrel is A glue , the yellow one barrel is B glue.
Total Net weight is 20KG
You can see from the picture that the gliue is very clear...
Advantages :
1. Adhesive well
2. Yellow resistance, self-leveling, without bubble, high brightness.
3. Can be cured at normal temperature or by heating.
4. Crystal floor coating Epoxy Resin can be cured under normal temperature, with the feature of low viscosity and good flowing property, natural defaming, anti-yellow, high transparency, no ripple, bright in surface.
5. Can get any color you want by add pigments.
6. Easy to clean and repair.
7.No ripple,bright in surface,odourless,eco-friendly,nontoxic,waterproof and so on.
2. Yellow resistance, self-leveling, without bubble, high brightness.
3. Can be cured at normal temperature or by heating.
4. Crystal floor coating Epoxy Resin can be cured under normal temperature, with the feature of low viscosity and good flowing property, natural defaming, anti-yellow, high transparency, no ripple, bright in surface.
5. Can get any color you want by add pigments.
6. Easy to clean and repair.
7.No ripple,bright in surface,odourless,eco-friendly,nontoxic,waterproof and so on.
Production process
1.
Keep the table or photo frames or others flat, clean and dry
2.
Weight the A glue and B glue in the weight ratio 3:1.
Then blend them in time fully.
3.
The AB glue is evenly poured onto the surface Flatten the glue with a squeegee. Then Leave it(at room temperature at 25 degrees) for 20 minutes to automatically defoam.
4.
Let them dry Naturally
Or Put the finished MDF plate into the oven, set the temperature at 30 degrees for an hour, and then raise the temperature to 40-60 degrees for 5 hours.
Attention Please
1. Glue si Packed for each group of 20KG, A glue 5KG / pot, B glue 5KG / pot2. After the plastic bucket is opened and the glue is poured out, it needs to be covered immediately to avoid contact with the air
for a long time, which causes the glue to oxidize and crystallize.
3, the glue must be sealed and stored in a cool and ventilated place to avoid high temperature or sun exposure
4. The glue may crystallize in the low temperature condition in winter, and it needs to be dissolved in a 60 degree oven before use.
5. The shelf life of this glue is 6 months. If the shelf life is exceeded, please try it in small amount. If it is qualified, you can continue to use it.
6. The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
7. Keep away from children. Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
8. If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
9. When the temperature is lower than 15 ℃, please heat A glue to 30 ℃ before mixing it with B glue (A glue will thicken at low temperature); after use, the glue must be covered with a lid to avoid rejection due to moisture absorption. . When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air and form a white mist on the surface. Therefore, when the relative humidity is higher than 85%, it is not suitable for room temperature curing, heat curing is recommended.
Packing & Delivery
Storage and Package
The goods should be kept in a air-over ,cool, and dry place with tight package.
20Kg/group, (5kg/barrel, 3 barrels for A glue, 1 barrel for B glue)
Beofor delivery, we will pack all the carton in pallets or plywood box to ensure the safe transportation
Other Application
Crystal Epoxy is used in the process of gifts, fine products, jewelry, signs, badges, badges, buttons, key rings, IC cards, trademarks
Here is one sample for one bracelet
1Prepare
2.Use a level meter to measure the level of the table
3 Bring Gloves
4. Measure the weight A and B in the weight ratio3:1
5. Blend it in full time
6.Pour the glitter into the measuring cup and stir it evenly
7.Use a dropper to drip glue into the mold
8 .Stamping bubbles with needles
9. Wait it dry and take out
Our Company
Jinan Powerful Image Equipment Co.,LTD. is committed to international well-known company.
We have been in this industry more than 10 years. So we have much experiences for producuing album machines and consumables such as UV coating machine, creasing machine, binding machine, paper cutter, adhesive pvc sheet, PS sheet,Epoxy resin crystal ab glue, cold/hot lamination films and so on.
Recommend Products
Album PVC sheet
Album Maker
Tile Grout
UV coating machine
MDF board strip
Cold films
Contact Me
My Skype: sophiadada
Whatsapp: 0086-15063342149 Tel/Wechat: 0086-15063342149
QQ: 1761868511
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier