Yellow Coating ABS 304 Stainless Steel Wall Mounted Lab Eyewash Station

Wall-Mounted Stainless Steel Eye Washer

Technical data

1. Material:SS,(304/316 Stainless steel)

2. Valves: 1/2″corrosion- resistant brass galvanized ball valve..
3. Water supply: 1/2″IPS
4. Water outlet: 11/4″IPS
5. Flow control: 9~11L/Min
6. Hydraulic pressure: 0.2MPA~0.8MPA
7. Original waster: Clean or leached water.
8. Operation condition: Eye Wash & Showers option for almost every industrial situation.

Structure of laboratory emergency eye washer

Wash head: for the right eye and facial cleaning spout.
Wash nozzle Dust: wash nozzle for dust protection device.
Switching valve: to open and close the flow valve means.
Water pipe: a device used to direct water flow.
Filter: used to filter out debris into eyewash.
Base: fixed eyewash. 

1.Use medium: it meets the standard of health standard

2.Main material: special SS304 stainless steel, which conforms to national standard, has good corrosion resistance of acid, alkali, salt and oil

3.The way to wash eyes switch: manual.When used, it is only needed to push the valve gently. The clean water comes out automatically from the nozzle, and the spray head is equipped with dust cover. When used, it can be automatically washed away with the flow of water.After the shut-eye switch is opened, the non-man will operate and will not shut automatically. Please turn off the switch and reset the dust cover when used.

4.Eye nozzle: eye nozzle built-in multi-layer filter, effectively filter the impurities in water, the water flow into a foamy water, effectively prevent the impurities in water, or to the injured eye due to water flow ultra secondary damage nerve and the injured area.
The filter screen is easy to remove, easy to clean and easy to maintain.

5.When this product is suitable for the environmental temperature is higher than 0 ℃, should pay attention to below 0 degrees and environment freeze protection of pipes

Application

Semiconductor, medical, chemical, testing organization laboratory and other workplaces need clean standard.

Packing:Wooden/Carton box or according to the customer requirement

Sample order:By courier express like DHL/USP/TNT/FEDEX or by air

Bulk order:By air or by sea

Port:Qingdao

Lead time:Received your payment and arrange the shipment

1.Q:Could I put my own logo on it?
A:Sure,customers' logo can be made by laser, engraved, embossed, printing etc.

2.Q:Should I pay extra for logo printing?
A:According to the actual situation,specific products.

3.Q:How about the quality?
A:Acquire the CE and meet America OSHA standard.
100% QC in produce process and before package.

4.Q:Could I buy 1pc sample first and small order ?
A:Of course, support sample order and small order, especially for new customers under certain condition.

5.Q:How much for 1pc sample?
A:Some cheap ones may free for 1pcs but need to see the actual stock.
Some expensive product like lockout station, customers are required to pay for it.

6.Q:If I have my thoughts, do you have person to design according to my concept?
A:Certainly,our design team is willing to do for you.

7.Q:How long to make a sample?
A:7~21days which depends on the samples' complexity.

8.Q:Is the sample fee refundable or not?
A:Sure, refundable once order confirmed.