Product Name | Mini 25mm 4ohm 2W Speaker |
Type | Dynamic speaker |
Rated Voltage(square wave) | 2.0W / 2.5W |
Sensitivity(S.P.L.) | 80dB±3dB at 1w/ 0.5m / 15,20,25,30×100Hz average |
Operating Temperature | - 30℃ ~ +65℃ |
Storage Temperature | - 40℃ ~ +65℃ |
Resonance Frequency | 1000±30% Hz at 1.0V Sine wave |
Impedance | 4Ω±15% at 1 KHz 2.0Vms Sine Wave |
Results of after test | After any following tests the response at 1 KHz shall not deviate more than 3 dB from the initial value |
Appearance | Should not exist any obstacle to be harmful to normal operation : Damages \ cracks \ rusts and distortions etc. |
Polarity | When positive voltage is applied to the terminal marked (+), diaphragm should move to the front. |
Load test | 2.0W white noise is applied for 48 hours No obstacle to be harmful to normal operation,damages, cracks, rusts, etc. Should not be audible at 4V sine wave between F0~7KHz. FO should meet initial one 2.0W white noise is applied for 48 hours S.PL.deviation of unit should be within±3dB |
High temperature durability | Temperature: +85℃±3℃ Duration: 48 hours. |
Low temperature durability | Temperature: -40℃±3℃ Duration: 48 hours. |
Humidity durability | Temperature: +70℃±2℃ Relative Humidity: 90%95% Duration: 48 hours (recovery 6 hours) |
Vibration durability | Speaker shall be measured after being applied vibration of amplitude of 1.5mm with 10 to 55Hz band of vibration frequency to each of 3 perpendicular directions for 2 hours. |
Drop test | Drop the speakers contained in normal box onto the board 40mm thick 10 times from the height of 75cm |
Packing strength | As per packing condition, from height of 1 meter, the unit is to be dropped 1 time each in three planes on concrete floor. |