YITENSEN 3125 Auto Power-off Insulation Tester Megger Price
Technical Data
| Function | Project | VICTOR3125 | |
| Insulation resistance function | 250V | Resistance range | N/A |
| Resistance accuracy | |||
| Rated current | |||
| 500V | Resistance range | 0~5.00GΩ | |
| Resistance accuracy | 5% | ||
| Rated current | 1mA | ||
| 1000V | Resistance range | 0~9.99GΩ | |
| Resistance accuracy | 5% | ||
| Rated current | 1mA | ||
| 2500V | Resistance range | 0~99.9GΩ | |
| Resistance accuracy | 5% | ||
| Rated current | 1mA | ||
| 5000V | Resistance range | 0~1.2TΩ | |
| Resistance accuracy | <100G:5% >100G:20% | ||
| Rated current | 1mA | ||
| The leakage current measurement | 0~1500uA | ||
| Short circuit current | About 3mA | ||
| The auxiliary function | Polarization index(PI) | √ | |
| Induced absorption ratio(DAR) | √ | ||
| Step voltage(SV) | 500V→1000V→1500V→2000V→2500V 1000V→2000V→3000V→4000V→5000V | ||
| The timing measurement(TIME) | √ | ||
| The output voltage monitor | √ | ||
| Automatic release voltage | √ | ||
Other functions
| Storage | Manual:260groups Homework:500groups | |
| Online communication | Isolation of USB communication, SCPI command, can realize remote control instrument by the device driver software | |
| The system time | The date +24h time (Replace the battery without re setting) | |
| Battery detection | Display the remaining battery power | |
| Auto Power-off | √ | |
| Backlight | The white LED | |
| Size | 210mm(L) × 155mm(W) × 95mm(D) | |
| Weight | 1750g(Does /t contain a battery) | |
| Enclosure protection | IP40 | |
| Power supply | 8×1.5V AA Alkaline battery The power adapter(AC100~250V) | |
| Overload | Insulation resistance:AC1200V/10S | |
| Voltage range:AC720V/10S | ||
| Withstand voltage | AC3250V(50/60Hz)/5S (Between the circuit and the outer box) | |
| Insulation resistance | 1000MΩ or greater/ DC 1000V (Between the circuit and the outer box) | |
Product Features:
1, Range: 500V, 1000V, 2500V, 5000V, the basic accuracy: 5%.
2, AC and DC voltage measurement: DC: 0V~± 1000V AC: 30V ~ 600V (50 / 60Hz),
the basic accuracy: 2%.
3, The maximum of measurement shows 9999 words, 36 section bar ring display.
4, The rate of measurement about 0.5 to 5 times / sec.
5, High-voltage insulation resistance detection for the automatic range.
6. Pl (polarization index), DAR (absorption ratio) automatic measurement,
7, Continuous test function.
8, Set the test time TIME function.
9, Automatic discharge function.
10, Step voltage test, temperature measurement, leakage current display.
11, The actual output voltage and the measured insulation value display at the same time.
12, Built-in real-time clock, for the matching and measurement work to provide accurate timing.
13, Two easy to operate data recording function: manual recording and job recording, and can
easily query the record data, the internal memory can be stored independently of 760 (group)
measurement data.
14, Available alkaline batteries, NI-HI battery or power adapter power supply, battery compartment
can easily replace the battery.
15, Large-screen LCD display, with white LED backlight.
16, The instrument communicates with the computer via an isolated USB interface and can
operate the instrument via a computer.
17, Simple man-machine operation, portable, rugged,suitable for field use.
Packing
1. Q: Do you have a catalogue? Can you send me the catalogueto have a check of all your products?
A: Yes , We have product product list.Please contact us online or send an Email to sending the catalogue.
2. Q: I need your price list of all your products, do you have a price list ?
A: We do not have a price list of all of our products. Because we have so many items,and it’s impossible
to mark all of their price on a list.And the price are always changing because of the producing cost.If you
want to check any price of our products, please feel free to contact us.We will send offer to you soon!
3. Q: I can find the product on your catalogue, can you make this product for me?
A: Our catalogue shows most of our products,but not all.So just let us know what product do you need,
and how many do you want.If we do not have it,we can also design and make a new mould to produce it.
For your reference,making a ordinary mould will take about 30 days.
4. Q : Can you make customized products and customized packing?
A: Yes.We made a lot of customized products for our customer before.And we made many moulds for our
customers alread.About customized packing,we can put your Logo or other info on the packing.There is no
problem.Just have to point out that ,it will cause some additional cost.
5.Q:Can you provide a free sample?
A:Sorry, we can not provide free sample, Buyer should pay the sample fee and we will send it out by
TNT/UPS/DHL/Fedex (freight collect).
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier