Brief Introduction
YHCB oil transfer tank truck PTO gear pump using Japan's advanced technology design and produce,its outstanding characteristic is high efficiency and energy saving.
Compared with ordinary gear pump, the amount of liquid transport, less energy consumption. ordinary gear pump capacity is 58m3/h,pressure is 2.8kg, use 18.5kw motor. But YHCB oil pump capacity 60m3/h,pressure 6kg, use 11kw motor.
YHCB oil transfer tank truck PTO gear pump mainly suitable for transferring all kinds of liquids with viscosity 5~1500cst, temperature below 100℃,not contain solid particles and non~corrosive. Such as petrol , Kerosene, diesel oil and mechanical lubricating oil. It is a kind of high efficiency and energy saving special gear pump. It has big capacity, high pressure,small volume,low noise,good self-priming performance, convenient to install and repair. It is also the ideal choice for oil tanker refitting industry and petroleum sector. This product refer to JB/6434-92 standard.
Model indication
Type: arc gear pump on-board gear pump
material:cast iron casing, bronze/nylon/steel gear,45# steel shaft, packing seal
advantage: explosion-proof, no spark. pump with car coupling.
big capacity
high pressure
have self-priming
max temperature:90 degree
3. Technical parameter
Model
|
Flow (m3/h)
|
Pressure(Mpa) |
Speed(RPM) |
Motor power(KW) |
50YHCB12 |
12 |
0.6 |
960 |
3 |
50YHCB15F |
15 |
0.6 |
960 |
3 |
60YHCB30 |
30 |
0.6 |
960 |
5.5 |
65YHCB35 |
35 |
0.6 |
960 |
5.5 |
76YHCB40 |
40 |
0.6 |
960 |
7.5 |
80YHCB60 |
60 |
0.6 |
960 |
11 |
80YHCB80 |
80 |
0.6 |
960 |
15 |
100YHCB100 |
100 |
0.6 |
960 |
22 |
150YHCB150 |
150 |
0.6 |
960 |
37 |
Other type tank truck pumps
old type truck gear oil pump(pump's body don't have the fixed holes):
New type truck gear oil pump(pump's body have the fixed holes):
BOTOU HONGHAI PUMP CO., LTD
Botou Honghai Pump Co., Ltd.is the development, manufacture all kinds of gear pumps, heat pumps, three screw pump, centrifugal pump based professional manufacturers, set Branch, engineering, trade and services in one, well-equipped, the design level advanced production and testing means complete. My company has a strong research and development capabilities, gear pump product design using CAD and CAPP and international standards, the products are widely used in areas of national petroleum, chemicals, shipbuilding, electric power and so on. My company has a complete production system and quality assurance system, has won the trust of domestic and foreign customers.
WAREHOUSE ACCESSORIES
Our company passed the ISO9001 quality system certification,and to "control each process, do a good job of every product," the idea of deep into the hearts of each employee,and each device will pass the load carrying test before leaving the factory, and will never deliver the problematic equipment to customers.
We have years of experience in foreign trade and export, we have a good understanding of different customer needs in developed and developing countries, and have provided satisfactory designs for a large number of customers. Our products have been sold to over 70 countries and regions in the world and established long-term relationships with customers Strategic cooperation.We are convinced that: the real relationship will not be the end of delivery, satisfied with the service of greater significance!
Sea transport shipping
Air transport shipping
Express transport shipping
Railway transport shipping