YH stone water cutting machine cutting head 5 axis water jet cutting head price
 |
| Name :waterjet 5 axis cutting head (1-10°) |
| Application :waterjet abrasive cutting machine |
| Warranty :1 year for YH waterjet cutting machine |
Advantages of Water Jet cutting
1.Environment friendly: With Water and sand as cutting medium, no hazardous wastes are generated and the cutting process is environmental friendly.
2.High thickness cutting: Water Jet can cut up to 170 mm Stainless Steel; 250 mm Aluminium ; 300 mm Titanium.
3.High Accuracy: Water Jet cutting machines can cut material with a positional accuracy of +/- 0.03 mm.
The indicated value refer to a measured length of 1000 m at RT 20 C +1 C according to VDI/DGQ3441.
4.Machine virtually can cut any 2D shape: Water Jet can cut any 2 dimensional profile from most of the material.
5.High edge quality: Leaves a satin smooth finish thus reduces secondary operations.
6.Minimal or no fixtures required: As the force of the water jet is vertically down, no fixtures are required for most of the material due to negligible side forces. Thin sheets may require some weight to be placed.
7.Saves raw material: When machining or roughing out expensive materials such as titanium, the scrap still has a high value. This is because they will give chunks, not chips. It is possible to get more parts from the same material because of the abrasive jets low kerf width.
8.One tool universal application: Water Jet uses one cutting head for all material or operation, no need to change tool based on material or operation. The figure shows the machining of 2D shape with single tool for multiple operations such as slots, radii, holes, and profile in 1 to 2 minute setup.
Products brand: FL-OW ; K-MT ; O-max And Other Chinese Brand
Customize order is accepted too.
| Product Category | Product Name |
|
High pressure Waterjet parts |
40k/60k/87k/94k High pressure intensifier parts of , direct drive pump parts, parts for waterjet head head ; high tubes, nozzles and orifices. |
| Intensifier assembly | 60k/ 87k/ 40k/94k intensifier assembly and parts, SL-V intensifier assembly. |
| Cutting head | Abrasive waterjet cutting head, pure waterjet cutting head, 5 axis cutting head. |
| Pumps |
Intensifier pump 60k; Intensifier pump 87k; Direct drive pump; Hyplex prime pump;
H2O Pump; JetLine-50;
Double intensifier pump 87k/60k; water jet pumps with 4 intensifiers assembly 87k. |
| Waterjet repair kits | Major/minor repair kit; Check valve repait kit; On/off valve maintenance kit; Bleed down repair kit; HP seal repair kit; PCV repair kit; Dynamic rubuid kit; Swivel repair kit; Low pressure repair kit and so on. |
| Waterjet cutting machine | Gantry type and Fly arm type;. |
| Waterjet nozzle | For different waterjet cutting head. |
| Waterjet orifices | Standard dimension for waterjet cutting heads. |
| Fittings and hp tubes | Any fittings and Coil pipes for the waterjet cutting machine. |
| Installation tools | Waterjet installation tools. |
| Others | Other parts for waterjet cutting machine. |
1. waterjet cutting machine--cantilever and gantry waterjet cutting machine
2. waterjet high pressure pump
380mpa--direct drive pump
420map--single intensifier pump and double intensifier pump
600mpa--double intensiifer pump and four intensifier pump for HPP.
3. waterjet spare parts
waterjet repair kits
420mpa and 600mpa waterjet intensifier assembly
waterjet parts for cutting head
fittings and high pressure pipe.
Waterjet cutting head
waterjet nozzles
waterjet orifices
Carton Or Wooden Box:
| Carton |
0.01KG--12.00KG |
| Wooden box | ≥12.00kg |
Shipping:
| Express/Air |  |
| Pallet | Shipping container |
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A:Sorry, we couldn’t offer the sample for free charge
Q: What is your terms of payment ?
A: 100% in advance balance before shipment. T/T, Paypal, West Union
If you have another question, pls feel free to contact us as below:
.
Our advantages:
1. Are you a factory?
We are a factory. We manufacture the parts depended on the drawings.
2. Warranty time:
One year
3. After- sale service:
YH own a techincal service team to solve your problems.
4. Delivery time:
In 3 days if paid.
5.Short response time:
24 Serive hours to make corresponding solution to your problem.
6. Payments term:
T/T, L/C, PayPal; Western Union ...
Detection:
Cutting Samples:
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier