Model | MDL-III-400 | MDL-III-405 | MDL-III-410 | MDL-III-415 | |||
Wavelength (nm) | 400±5 | 405±5 | 410±5 | 415±5 | |||
Operating mode | CW | ||||||
Output power (mW) | >1, 2, 3, …,300 | >1, 2, 3, …,500 | >1, 2, 3, …,300 | >1, 2, 3, …,300 | |||
Power stability (rms, over 4 hours) | <1%, <3%, <5% | ||||||
Transverse mode | Near TEM00 | ||||||
M2 factor | <1.5 (<1.2, optional) | ||||||
Beam diameter at the aperture (1/e2,mm) | ~2.5 (~1. 0, optional) | ||||||
Beam divergence, full angle (mrad) | 0.5 | ||||||
Polarization ratio | >50:1 (>100:1, optional) Horizonta±5 degree (Vertical Optional) | ||||||
Warm-up time (minutes) | <5 | ||||||
Pointing stability after warm-up (mrad) | <0.05 | ||||||
Beam height from base plate (mm) | 24.8 | ||||||
Operating temperature (℃) | 10~35 | ||||||
Power supply (85-264VAC) | PSU-III-LED/ PSU-III-FDA | ||||||
TTL / Analog modulation | TTL or Analog with 1Hz-1KHz 1KHz-10KHz, 10KHz-30KHz optional | ||||||
Expected lifetime (hours) | 10000 |