XMTD-618T digital timer

I.Technical Specification:

                   Measurement deviation:±0.5F·S±1,additional cold end compensating deviation±1℃

                   Input(can be selected):CU50(-50~150),PT100(-80~600),K(-30~999),E(-30~700),

                                   J(-30~900),T(199~400)

                    Relay output (passive) contact capacity: AC250V 5A(resistance load) period 2~120s                                          can be adjusted.

                   Time range:0~999s or 0~999m(can be selected)

                   Driving solid relay signal output:Driving electric current >15mA no-load                                                                voltage>12V,period is about 2S.

                   Work power:AC85V~242V,50HZ   Power consumption<3W

                   Work environment:0~50℃,relative humidity≤85%,without corrode and strong electric                                          radiation.

II. Main features:

        XMTD-618T digital timer is double row 3-LED display, respectively display temperature measurement value (PV) and temperature set value (SV) under normal mode;When it is time temperature control, respectively display temperature measurement value (PV) and running time count down (SV),and also provide kinds of time control method selection;The controller can input kinds of signal which are used interchangeably,it adopt ON/OFF(P=0),PID control,allowing an easy parameter setting and convenient inputting,is widely used over temperature automatic control systems of machinery,chemical,ceramics,light industrial,metallurgy,petrifaction and heat treatment and so on.