Features
1.This is specifically designed for applications in serial with the 100Vac-240Vac main, i.e. capacitive divider, for example,energy meter, LED driver etc.
2.Metallized polypropylene film
3.Good self-healing properties, withstanding surge voltage stressing
4.Long stability of capacifance
5.Good properties in damp environment
6.Excellent active and passive flame resistant abilities
Specific ( IEC60384-14)
No | Test items | Performance | Test Method |
1 | Withstand voltage (Between Terminals) | Shall be no abnormality | 1200VDC Test Of 60sec. |
Between terminal and Enclosure | Shall be no abnormality | UR×200%+1500VAC, 60sec. | |
2 | Insulation resistance (Between Terminals) | CR ≤ 0.33uF IR ≥ 15,000MΩ CR > 0.33uF IR ≥ 5,000 MΩ÷C(uF) | Measured at 100±15VDC, For 60sec / 25℃ |
3 | Capacitance | Within the tolerance specified | 1KHz, 1Vrms Max. at 25℃ |
4 | Dissipation Factor | 0.001 (0.1%) Max. | 1KHz, 1Vrms Max. at 25℃ |
5 | Tense Strength of Terminal | No wire breakage and No Damage of Capacitor | 1. Load Force : 1.0 Kg 2. Holding Time : 10 ± 1sec |
6 | Bending Strength of Terminal | No wire breakage and No Damage of Capacitor | 1. Load Force : 0.5 Kg |
7 | Vibration | (1) Appearance : No Visible Damage (2) Contact : Normal | a. Frequency change : 1min. per cycle 10~55~10Hz b. Vibration distance : 1.5mm c. course: X,Y,Z (axis) d. Time : 2h / axis ( 6h in total) |
8 | Solder-ability | 95% Of The Surface Tinning | a. Solder temperature: 270±5℃ b. Solder time: 2±0.5se |
9 | Heat Shock test | (1) Appearance : No Visible Damage (2) Withstand Voltage : Normal (3) Capacitance Change : ≤ ±3% of the Initial Value | The terminal of capacitor shall be immersed in the melting solder. a. Solder temperature: 270±5℃ b. Solder time: 3±0.5sec |
10 | Cold Resistance | (1) Appearance : No Visible Damage (2) Capacitance Change : ≤ 0~ -10% of The Initial Value | a. Test Temperature: -40℃ b. Test Times: 2Hrs |
11 | Dry Heat Resistance | (1) Appearance : No Visible Damage (2) Withstand Voltage : Normal (3) Capacitance Change : ≤ +5~ -2% Of The Initial Value (4) Insulation Resistance:≥50%of the rated value | a. TEST TEMPERATURE: 110℃ ± 2℃ b. Test Times: 2Hrs |
12 | Humidity Resistance | (1) Appearance : No Visible Damage (2) Withstand Voltage : Normal (3) Capacitance Change : ≤ ±1% of The Initial Value (4) Insulation Resistance: ≥50%of the rated value (5) DF ( tanδ) ≤ 0.001 | a. TEST TEMPERATURE: 40℃ ± 2℃ b. RELATIVE HUMIDITY: 90 ~ 95% c. Test Times: 500±24 HRS |
13 | Heat Resistance (Charge & Discharge) | (1) Appearance : No Visible Damage (2) DF ( tanδ) ≤ 0.001 (3) Capacitance Change : ±10% of The Initial Value (4) Insulation Resistance: ≥50%of the rated value | a. Test Voltage : Rated Voltage Charge for 2 sec. Discharge for 2 sec. Repeated For 1000±100 cycles b. Test Temperature: 110℃±2℃ |
14 | Heat Resistance ( Continuous) | (1) Appearance : No Visible Damage (2) DF ( tanδ) ≤ 0.002 (3) Capacitance Change : ±10% of The Initial Value (4) Insulation Resistance: ≥50%of the rated value | a. Test Voltage : 125% of The Rated Voltage for 1000Vrms for 0.1s every one hour during tset. b. Test Temperature: 110℃±2℃ c. Test Times: 1008±24Hrs |
Shenzhen Chen Xin Hong Electronics Co., Ltd. is located in Asia's largest Electronic market —— Huaqiang north electronics market. It is a professional manufacturer of film capacitor with high quality, Our brand is WQC.
WQC capacitor manufacturer originated in Taipei. Taiwan, China in1983,specialized in developing and producing thin Film Capacitors. Continue to learn advanced technology and production methods from German and Japanese peer enterprises. Fully focus on capacitive R&D, design and innovation. Now we have became a large enterprise facing the world with the most advanced production equipment , testing equipment in peers, and the production capacity is 0.6 million pieces per day, and the annual output is more than 2 billion.
WQC X1/X2/Y1/Y2/CBB61 series has obtained UL/VDE/CQC/KC/S3/S0 certifications at the world's most high-end standard. The products are widely used in computer display power supply, power adapter, audio, LED, new energy vehicle charging pile, industrial controller, various type of household appliance control board ,communication equipment, etc.
1.Inquiry and consulting support.
2.Sample testing support.
3.View our Factory.
4. After sending, we will track the products for you once every two days, until you get the product.If you have any questions about the problem, contact with us, we will offer the solve way for you.
Q1. What is your terms of packing?
A: Generally, we pack our goods in brown cartons.
Q2. What is your terms of payment?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.