X-760E Technical Parameter | |||||||
Model | X-760E | ||||||
Item | Wired 2D Barcode Scanner | ||||||
Physical Parameter | |||||||
Material | ABS+PC | ||||||
Power Supply | DC 5V 2A ±5% | ||||||
Power Consumption | 160mA(Working);41mA(Stand by);200mA(Maximum)[Average Current] | ||||||
Maximum Consumption | 0.80W(Working);0.20mW(Stand by);1.00W(Maximum)[Average power consumption] | ||||||
Weight | 112.0g±5g(Without Cable) | ||||||
Size | L * W * H:168.9 * 70.7 * 94.7(Unit:mm) | ||||||
Color | Black | ||||||
Performance Parameter | |||||||
Interface | USB ;(RS232 can be customized ) | ||||||
System Supported | Linux,Android,Windows XP,7,8,10,MAC | ||||||
Language Supported | English; Belgium; Finland; sent; Germany; Italy; Poland; United Kingdom; Denmark; Norway; Spain; Portugal; Turkey Q; Turkey F; Japan; Russia; Czech Republic; Thailand; Ukraine; Brazil; Greece; China; Netherlands; Poland ;;Slovakia; [Support virtual keyboard] |
||||||
Sensor | 640×480 Global exposure CMOS | ||||||
Light Source | Red light LED illumination + Red light LED Focus | ||||||
Processor | 32-bit ARM MCU + DSP | ||||||
Motion Tolerance | Code128: 60cm/sec QR: 65cm/sec |
||||||
Resolution | ≥4mil | ||||||
Bit error rate | 1/5 million | ||||||
Reading Mode | Image | ||||||
Trigger Mode | Manual;Auto-Sensing;Continuous scanning | ||||||
Prompt Mode | Buzzer, Indicator Light(LED) | ||||||
Print Contrast | ≥25% | ||||||
Field of view angle | 37° horizontal, 28° vertical | ||||||
Scanning angle | Roll360°, Pitch±55°,Yew±55° | ||||||
Decoding Capability |
1D | Interleaved 2 of 5 ITF-6 ITF-14 ISBN Code 11 UCC/EAN-128 GS1 Databar Matrix 2 of 5 Industrial 2 of 5 Code 128 EAN-13 EAN-8 Code 39 UPC-A UPC-E Codabar Standard 2 of 5 Plessey MSI-Plessey Code 93 GS1 composite code |
|||||
2D | PDF417 Data Matrix QR Code HanXin AZTEC Maxicode GM code |
||||||
Scanning Depth | Code39 5.83mil(15 bytes):7cm - 18cm Code128 7.50mil(16 bytes):8cm - 15cm Data Matrix 10.83mil(8 bytes):3cm - 12cm Code QR 10.83mil(8 bytes):3cm - 16cm |
||||||
Environment Parameter | |||||||
IP Grade | IP52 | ||||||
Operating Temp. | 0 to 50℃ / 32 to 122℉ | ||||||
Storage Temp. | 0 to 50℃ / 32 to 122℉ | ||||||
Operating Humidity | 20% to 85%(No Condensation) | ||||||
Storage Humidity | 20% to 85%(No Condensation) | ||||||
ESD Protection | 15KV air discharge | ||||||
Shock Resistance | 1.2m free fall on concrete surface | ||||||
Environment illumination | 0→100000Lux |
1. Fail to read barcodes. A. Some barcode types don’t set to be read as factory default. Please check whether you enable this function. B. The barcode is not correct. Please generate a new barcode. C. There’s direct sunlight on the barcode and the photoreceptor becomes saturate. Please avoid direct sunlight. D. There’s transparent material covered on the barcode. The high reflectance will influence the decoding performance. E. Hardware failure: defective engine board. |
2. Can read barcodes, but can’t upload data. A. Please check whether the cable is connected well. B. Please check whether the settings of PC port and serial scanning are the same. C. If it is wireless barcode scanner, please check if it is paired well with the computer. |
3. There’s no electricity of the barcode scanner. A. PC insufficient electricity supply or external power source failure. B. Hardware failure: defective cable or mainboard. |
4. Wireless barcode scanner pairs successfully, but can’t upload data. Please reset factory default. Scan ‘factory default’ and ‘serial mode’. |