Wuxing Electric Hydraulic Bike Disc Brake Levers Mountain Bike, Bicycle hydro Disk Brakes 156PYD

Warning: Do not hold the handle before the barrier installed, because calipers are with automatic compensation adjustment function, when hold the handle, the caliper will move forward and push pads forward, which makes gaps of the brake not enough for installing. More times hold the handle, smaller the gap is, at this time the barrier shall be inserted between two pieces of brake pads, and push the brake pads back to its original position. lock disc on hub disc seat surface by 6pcs M5 disc screw

(1.1)Wear gloves when operating; please do not touch the disc brake surface with fingers directly, because the grease of the finger will lower disc braking performance.

(1.2)Installation direction of the disc should be in accordance with the arrow.

(1.3)6pcs screws locking in diagonal order

(1.4)Do not get any grease on the disc, if so, please use alcohol to clean it.

(2)Insert the wheel that locks the disc into the fork or frame, then lock the wheel

(3)Hold the caliper on the fork or carriage, and do not lock it so that the caliper can be moved. (4)Assemble the hydraulic handle on the handle bar

(5)Hold the hydraulic handle 5 to 8 times and fix it with a rubber band or rope (in a clenched state) so that the caliper clamps the disc (the caliper adjust position automatically) and then locks the 2pcs M6 screws alternately.

(6)Release the handle, turn the wheel to check whether the disk is interfering with the brake pad, and if it is smooth, it means OK. If it is not smooth, loosen the screw and repeat step 5.

(7)on bike test:

The braking force of initial 10-30 times will be weak. (Due to the new brake pads will full contact with the disc after run-in, when run-in, the bike test speed should not be too fast, pay attention to the brake distance)

Q1.CAN I HAVE A SAMPLE ORDER FOR LED LIGHT?

A:Yes,we welcome sample order to test and check quality.Mixed samples are acceptable.

Q2.WHAT ABOUT THE LEAD TIME?

A:Sample needs 3-5 days,mass production time needs5-7 days,with water-proof connector time needs 15-17 days.

Q3.DO YOU HAVE ANY MOQ LIMIT FOR LED LIGHT ORDER?

A:Low MOQ,lpc for sample checking is available.

Q4.HOW DO YOU SHIP THE GOODS AND HOW LONG DOES IT TAKE TO ARRIVE?

A:We usually ship by DHL, UPS , FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea Shipping also optional.

Q5.HOW TO PROCEED AN ORDER FOR LED LIGHT?

A: Firstly let us know your requirements or application.

Secondly we quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly we arrange the production.

Q6. IS IT OK TO PRINT MY LOGO ON LED LIGHT PRODUCT?

A: Normally we don’t supply custom made Logo printing.

Q7: DO YOU OFFER GUARANTEE FOR THE PRODUCTS?

A: Yes,we offer i years warranty to our products.

Q8: HOW TO DEAL WITH THE FAULTY?

A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.

Secondly,during the guarantee period,we will send new lights with new order for small quantity.For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.