Worm Gear Price used in worm drive
A gearbox designed using a worm and worm-wheel will be considerably smaller than one made from plain spur gears and has its drive axes at 90° to each other. With a single start worm, for each 360° turn of the worm, the worm-gear advances only one tooth of the gear. Therefore, regardless of the worm's size (sensible engineering limits notwithstanding), the gear ratio is the "size of the worm gear - to - 1". Given a single start worm, a 20 tooth worm gear will reduce the speed by the ratio of 20:1. With spur gears, a gear of 12 teeth (the smallest size permissible, if designed to good engineering practices) would have to be matched with a 240 tooth gear to achieve the same ratio of 20:1. Therefore, if the diametrical pitch (DP) of each gear was the same, then, in terms of the physical size of the 240 tooth gear to that of the 20 tooth gear, the worm arrangement is considerably smaller in volume.
Worm Gear Types
There are three different types of gears that can be used in a worm drive.
The first are non-throated worm gears. These don't have a throat, or groove, machined around the circumference of either the worm or worm wheel. The second are single-throated worm gears, in which the worm wheel is throated. The final type are double-throated worm gears, which have both gears throated. This type of gearing can support the highest loading.
An enveloping (hourglass) worm has one or more teeth and increases in diameter from its middle portion toward both ends.
Double-enveloping wormgearing comprises enveloping worms mated with fully enveloping wormgears. It is also known as globoidal wormgearing.
OuNaiDa worm gears information:
Modules:1-8
Gear precision: class 4
Material: Delrin, brass, steel, stainless steel, alluminum and cast iron
Heat Treatment: Hardening and Tempering, High Frequency Quenching, Carburizing Quenching and so on.
Surface Treatment: Galvanizing/Zincplating, Dacrotized, Black Anodic Treatment, Spray Printing, Mirror Finish, Burnishing, Sand-blasting and so on according to ROHS demand.
Inspection: All items are checked and tested thorouhgly during every working procedure and after the product is finally manufactured to ensure that best quality product goes out in the market.
Durable, Good Wear Resistance
We can offer you all kinds of gear (spur gear, bevel gear, spiral gear, internal gear,worm gears) transmissions.They are of good quality, small noise and good performance of transmission. Our gears can be standard as per European or American standard or special as per your drawings or samples.
If you are looking for manufacturing services of worms gears, just contact us for more information or to schedule your service.
Contact: