Working Pressure 124bar Aluminum Alloy 0.8L 20oz Co2 Paintball Tank

A paintball gun CO2 tank is fairly simple, consisting of an all aluminum cylinder and a pin valve.The pin valve is depresses when you screw the CO2 tank in to your paintball gun, allowing CO2 into the gun (usually about 600 800psi). Many guns use a simple valveor blowback style system to control the gas flow and fire paintballs, to better control the consistency and pressure level of the gas inside the marker. most guns will incorporate a regulator CO2 is not recommended for paintball guns that are Electropneumatic or guns that have a low toleration for liquid CO2 These CO2 tanks have several safety features, as well.
1800psi Burst Disk - If the pressure inside the CO2 tank exceeds 1800psi, a burst disk will safely release all the air out to prevent a possible rupture. Possible causes would be leaving your tank in direct sunlight, allowing the gas to expand.

Long before pressure inside the tank could reach a dangerous level, the 1800psi burst disk will release the pressure out. Simply screw the CO2 tank into your paintball gun, and you're ready to go.