Size | Diameter | Cutting Angle | Cutting thickness |
1/4*1/4 | 6.35 | 90° | 6.35 |
1/4*5/16 | 7.96 | 90° | 7.96 |
1/4*3/8 | 9.52 | 90° | 9.52 |
1/4*1/2 | 12.7 | 90° | 12.7 |
1/4*5/8 | 15.9 | 90° | 15.9 |
1/4*3/4 | 19.5 | 90° | 17.5 |
1/4*7/8 | 22.2 | 90° | 19.1 |
1/4*1 | 25.4 | 90° | 20.7 |
1/2*1/4 | 6.35 | 90° | 6.35 |
1/2*5/16 | 7.96 | 90° | 7.96 |
1/2*3/8 | 9.52 | 90° | 9.52 |
1/2*1/2 | 12.7 | 90° | 12.7 |
1/2*5/8 | 15.9 | 90° | 15.9 |
1/2*3/4 | 19.05 | 90° | 17.5 |
1/2*7/8 | 22.2 | 90° | 19.1 |
1/2*1 | 25.4 | 90° | 20.7 |
1/2*1-1/8 | 28.6 | 90° | 22.2 |
1/2*1-1/4 | 31.75 | 90° | 25.5 |
1/2*1-3/8 | 34.9 | 90° | 25 |
1/2*1-1/2 | 38.1 | 90° | 25 |
1/2*1-5/8 | 41.3 | 90° | 30 |
1/2*1-3/4 | 44.5 | 90° | 30 |
1/2*2 | 50.8 | 90° | 30 |
Product Name | V groove router bits | |
Material | Tungsten carbide | |
Shank | 1/4 ,1/2 shank | |
Surface Finish | Surface painting | |
Application scenario | Solid Wood Board, particleboard, plywood, MDF, etc. | |
Features | 1.Using Tungsten Steel Blade, smooth cutting, high finish. | |
2.High frequency welding of Blade Body, wear-resisting and durable. | ||
3.Cutting surface is finished, without burrs and skins char. | ||
Tool selection | To achieve your requirements, please be sure to use a short edge of the tool, the blade is too long or too long will cause machining vibration and bias, resulting in tool damage and affect the quality of processing, we recommend using tools with larger shank diameters. | |
Tool maintenance | 1.Keep the tool clean, remove resin, wood chips, and other dirt from the wood after use, and clean the tool with a standard industrial solvent. | |
2.A small amount of oil can prevent the surface of the tool rust, cleaning the tool handle of all the stains to prevent the use of sliding phenomenon. | ||
3. Do not take the initiative to sharpen and change the shape of the knife, because each grinding process requires professional grinding equipment and professional grinding skills, otherwise it is easy to cause knife fracture, accidents. | ||
Tool operation | 1.Woodworking milling cutters are designed for hand-held and bench-mounted woodworking engraving machines. They should not be used on such machines as electric drills and drilling machines. | |
2. cutting tools can be hard wood, cork, synthetic board and other wood processing to a smooth surface, but to avoid processing copper, iron and other metal materials and sand, stone and other non-wood materials. | ||
3. be sure to use the right size of the jacket, because wear, not round enough and the hole with a taper jacket can not provide enough tightening force, resulting in vibration or twist off the handle and fly. | ||
4. Do not think that the new jacket must be safe and reliable, when the tool is clamped and found that the tool handle has uneven contact marks or grooves, indicating that there are slip conditions and jacket inner hole deformation, should immediately replace the jacket, in case something goes wrong. | ||
5. after the tool is clamped, if it is found that the tool is beating when working, the machine should be stopped immediately, and the tool handle and the clamp should be repeatedly clamped several times to make full contact before working. | ||
6. The contact between the tool handle and the jacket should be good, and the tool handle should be fully inserted into the jacket to make it firm, so as to provide enough tightening force to the tool, and not only a small part should be inserted into the jacket, otherwise, it is easy to break the hilt and damage the tool. | ||
7.Use proper eye and ear protection when operating. | ||
8. Keep your body, clothes, and other objects away from working knives. |
suggested rotary speed of router | ||
Diameter | Rotational speed | |
1”(25mm) | 24,000RPM | |
1-1/4”-2(30-50mm) | 18,000RPM | |
2-1/4”-2-1/2(55-65m) | 16,000RPM | |
3”-3-1/2(75-90mm) | 12,000RPM |
1.Inner packing: as requirements |
2.Outer packing: as requirements |
3.Standard shipping marks on carton: as requirements. |
4.We are also ready to provide the customized packing, such as color plastic bag, color boxes, label stick, etc. |
5.Fumigation-free wooden pallet can be provided if necessary. |
1.Delivery way can be appointed by buyers or recommended by us. |
2.Sea freight, Air freight, DHL, UPS, FEDEX, TNT and etc. |
3.Lead time: 1 to 6 weeks depends on buyers’ purchase order quantity and special requirements. |
4.Time of sea or air freight: depends on destination address. |
5.Payment: T/T, western union, Paypal. |
1.Response time within 24 hours |
2.Quick and on time shipment |
3.Technical support |
4.Product drawings and pictures available for customer's catalog design. |
Q1.Can you customize the products according to samples or drawing design? |
-Yes. We have professional engineers to support the customized products for our customers. |
Q2.Can you put our company's logo on the products? |
-Yes. we can put your logo if you can provide us with copyright and letter of authority. |
Q3.Can you customize our packing? |
-Yes. please let us have your packing design or packing idea. |
Q4.Do you offer free samples for checking the quality? |
- you can ask some samples for testing after confirming our prices, but please pay the sample and freight fee, the sample fee will be returned to you after you making official order. |