Woodturning products 80 grit electroplated cbn 8 inch 5 8 arbor grinding wheel

Woodturning products 80 grit electroplated cbn 8 inch 5 8 arbor grinding wheel

CBN Radius Grinding Wheels for Woodturning

Available size:

Available Grit: 60 grit, 80 grit, 180 grit, 220 grit, 350 grit, 600 grit, 800 grit, 1000 grit, 1200 grit

CBN Radius and Flat Grinding Wheels for Woodturning

Available size:

Available size: 60 grit, 80 grit, 180 grit, 220 grit, 350 grit, 600 grit, 800 grit, 1000 grit, 1200 grit

Application: 

Differently from aluminum oxide grinding wheels, woodturning CBN sharpening wheel cuts fast, stays cool and never needs dressing or shaping. With only a very light amount of pressure when

sharpening and proper care, you can sharpen your tools to a razor sharp edge and never need to buy another sharpening wheel again.

About the CBN grinding wheel for woodturning, there are two kinds, one is only with radius edge, another one is with radius edge and flat coated.

Why is CBN?

CBN issuperior to all other materials for grinding hardened steel, it hardly generates a high temperature, because CBN has an extremely good conductivity for temperature. This is also helped by the shape of the metal body of the wheel.

For woodturning wheel, there are two types. One is a mix of abrasive and a bonding agent, that is applied to an aluminum hub in a layer. The other type is a machined steel hub with the abrasive material plated to the surface of the wheel.

Features:

1. Produces a superbly sharp cutting edge

2. Fine finish on tool bevel

3. Fast, cool cutting action without coolant

4. Side surface for flat grinds on skews, scraper cutters and tool bits

5. No dressing or shaping required

6. Wheel stays flat, never changes shape

♦ JR Diamond Tools Co., Ltd. was established in 1992. As a professional manufacturer of diamond tools in China, we supply extensive high-quality diamond tools in the industries of stone, glass, electronic industry, construction, beauty and healthy, and crystal.

Workshop

After 23 years development, now we have resin tools workshop, vitrified tools workshop, electroplated tools workshop as primary, finish machining workshop and NC workshop as supplement.