Wireless Sensor System remote water tank level monitoring G7-H2Ex iot case
[listing_1]
G7-H2/H3 is a temperature humidity wireless sensor.
It transmits temperature, humidity data wireless via RF.
[listing_2]
G7-H2/H3 is a wireless sensor system supporting up to 60 temperature sensors.
It works on 433 MHz RF.
[listing_3]
RF Station receives wireless sensors readings, and uploads to central over Internet or LAN.
[listing_4]
G7-H2/H3 is a system with wireless sensor and Base Station.
Sensor reading will be uploaded to central via Ethernet.
[listing_5]
Wireless sensor transmits measurement to Base Station wireless.
RF Station uploads data to central over Ethernet.
[listing_6]
Up to 64 wireless sensors are supported by one Base Station.
Temperature, Humidity, Analog Sensor or Digital Alarm Input can be used in one single system.
[listing_7]
Max. 1200m wireless distance and 64 wireless sensors in one single system.
Temperature, Humidity, Analog Sensor or Digital Alarm Input can be used in one single system.
[In the Package]
1 x Base Station & RF Antenna
1 x AC/DC Adaptor
1 x Ethernet Cable
Up to 64 x Wireless Sensors in one single system
[How it Works]
(1) Wireless Sensor
The sensor transmits the temperature or humidity reading to Base Station wireless over radio frequency up to 1200 meter unblocked. Its internal battery operates for average one year. All sensors are waterproof and internal/external antenna adjustable.
* G7-T2/TX Wireless Temperature Sensor
* G7-H2/H3 Wireless Temperature Humidity Sensor
* G7-T2/TX-Ex Wireless Temperature Sensor [Extended Power]
* G7-H2/H3-Ex Wireless Temperature Humidity Sensor [Extended Power]
* G7-AD Wireless Analog Sensor
* G7-D2 Wireless Digital Alarm Input
(2) Base Station
It is a gateway between user and sensors. Base Station receives reading from max. 64 wireless sensors in a range of 1200m. This station is connected to the Internet or LAN connection. Information of all sensors collected in one data record is then sent to the central computer over LAN or Internet in Modbus TCP protocol.
(3) G7 Wireless Client App for Windows, iPad, Android
By using free G7 Client Lite, users receive data from Base Station over LAN or Internet. Data will be saved into file for future analysis and displayed in graphics with live alarm alert.
[Technical Specification]
G7 |
Wireless Sensor |
Temperature Range: |
-55 ~ 125 °C (+/- 0.5°C ) |
Humidity Range: |
1 ~ 100%RH (+/- 1% ) |
Transmission Interval: |
User Programmable 5s ~ 4 hours |
Sensor ID: |
Unique 8 digits |
RF Wireless: |
433 MHz, 4.8Kbit/s |
RF Power: |
10dBm |
Wireless Distance: |
1200 meter (unblock) |
Operation Rating: |
80mA (data transmission) |
Standby Rating: |
~3.0uA (sleep mode) |
Operating Voltage: |
2.6~3.6V DC |
Battery Life: |
Average 1~2 year |
Dimension: |
80 x 80 x 28 mm |
Extended Battery Life: |
Average 4~5 years |
Dimension: |
115 x 90 x 55 mm |
Base Station |
|
Protocol: |
Active TCP |
|
Modbus TCP |
Network Port: |
10/100M Ethernet |
Data Packet: |
Instant on incoming data of connected sensors |
RF Wireless: |
433 MHz, 4.8Kbit/s |
RF Address/Band: |
255/15 |
Operating Voltage: |
5 ~ 20V DC |
Rating: |
< 130mA |
Operating Temperature: |
-35 ~ 75 °C |
Dimension: |
70 x 65 x 35 mm |
[Applications]
* water pipes network real time monitoring - water in and out temperature
* oil/gas pipes network, pump stations
* underground water level real time monitoring
* environmental monitoring system - wind/temperature/humidity/CO2/pressure
* remote Industrial equipment monitoring
* rural equipment monitoring e.g. power plant, antenna tower
* measuring equipment data capture and report via Wi-Fi
* food chain, storage, transport industry, building management
* agricultural, farming, laboratory, medical industry
software
Software
(1) Setup Software
Free and User-Friendly Setup Software for Windows provides a user-friendly graphics interface of configuring the Smart Data Logger.
It allows user to save, export and import the configuration file.
(2) Centre Software
Free Centre Software is a small tool to receive data via GPRS, Ethernet or Wi-Fi for testing purpose.
(3) NET Client App for Windows, iPad, Android
Free NET Client accesses the live data or logged data from Smart Data Logger directly. It then displays the sensor readings in graphics modes on PC, iPad or Android tablet.
It allows user to monitor the real time sensor reading in graphics chart or HMI.
(4) Ultimate Server Client Software Package [Optional]
Ultimate Server is designed to manage a large number of Smart Data Loggers. It handles the data receiving via GPRS, Ethernet, Wi-Fi and SMS in both UDP and TCP protocol simultaneously. It manages the database of incoming data, data loggers and remote client users.
Ultimate Client allows user to monitor both real time data and historical data in graphics chart or HMI.
Company Information