Wireless Car Vehicle Magnetic Induction Loop Detector with high accuracy on detection
Wireless car loop detector from Rosim ITS technology Ltd
Rosim ITS dedicates to provide reliable and actionable data for our customers to enhance cost efficiency and operational reliability for traffic market.We believe accurate and reliable detection is the foundation for traffic and car parking management and safety of the road.It is a newest and high technology of traditional loop detector replacement.
Wireless car loop detector for traffic control system from Rosim ITS is made up of just two devices: wireless vehicle detector(WVD), wireless access point(WAP).
ROSIM WVD is a magnetometer-based car loop detector, which communicates with a roadside access point.
WVD will detect vehicle presence and transmit to the access point. The access point acquires the data from the individual detector and can report key traffic parameters including presence, average counts, average speeds, lane occupancy, and queue length at any time.
The communication between the access point and the sensors uses a ZigBee wireless protocol designed to minimize power consumption and extend the battery life of the sensors. The combination of these technologies brings to market a reliable, functional, flexible product that meets the data demands of traffic monitoring.
WVD is designed to bury in the ground, whose installation time is less than 5minutes, which minimized the lane closure time largely.With magnetic detecting technology, the accuracy goes up to 98%.what's more, sensors embedded in the road detect vehicle flow, speed, existence, direction and lane occupancy, which makes it flexible to integrate with various systems.
1.Wireless car loop detector ----Wireless Vehicle Detector
WVD-130x wireless car loop detector is designed for the pursuit of high efficiency and low cost ITS traffic application systems. Based on the technology of magnetic detection and uPower® wireless sensor network, WVD -130x detector can be easily installed on road in few minutes without any wiring to acquire dynamic traffic flow information with no maintenance for many years.
Technical Info. | Parameters |
Part number: | WVD-130x |
Wireless radio frequency: | 433MHz |
Communicate range: | 120m |
Wireless protocol: | ROSIM |
Detection technology: | Magnetic |
Detection accuracy: | >97% |
Reaction time: | 50ms |
Power supply: | Battery |
Battery life: | 10 years |
Maintenance: | OTA |
Product size: | Diameter 116mm/Height 90mm |
Load resistance: | 20 tons for static |
Protection level: | IP68 |
Work condition: | All weather |
Operation temperature: | -40~85degree |
Storage temperature: | -40~85degree |
Installation: | Embedded |
Application: | Traffic systems |
Magnetic detector Compare with induction loop detector
1.Loop detector installment difficult
2.Our wireless car loop detector installment
Application examples
RosimITS dedicates to provide high-quality detecting products for our customers with cost-effective price.all the products support wireless updating.
website:www.rosimits.com
Skype: kelly-zhang722
Mobile: +86-15398861264