Wireless ABCD buttons remote control KL300-2K

Wireless ABCD buttons copy remote control KL300-2K

It's a very popular remote duplicator with some key feature

> Prevent losing and replacing old remote controls
> Self learning remote control
> Used in home alarms, panic buttons, garage doors, rolling curtains and more
> Copying almost fixed code remote controls
> Face to face copy, easily operate

1,Clear code

To clear factory preset codes usedfor testing purpose, you need to do the following:

Press down top two buttons (lock and unlock ) at same time for approximately 3 seconds, then LED flashes 3 times, followed by continuous fast blinking, code deleted.

2,Copy

Place the original remote control and copy remote close together (<10mm),Press down one button of original button and the one of copy remote which you want to copy at same time, approximately 3 seconds then LED flashes 3 times, followed by a continuous fast blinking.
Repeat above step to clone other button.

NOTE: The best duplicating position varies depending on the original remote control you are using, you can try different positions until the code is successfully copied.

Compatibility list

1, PT2240 / PT2242

2, 2260 / 2262 / 2264

3, EV1527 / FP527/HS1527

4, HT12D / HT12E

5, HT600 / HT640 / HT680

6, HT6010 / HT6012 / HT6013 / HT6014 / HT6207

7,AX5026-1 / AX5026-2 / AX5026-3 / AX5026-4

8,AX5326-3 / AX5326-4

9,SMC918 / MC145026

Continue revamping...

If you didn't know whether your remote could be copied, please confirm with us firstly before placing.

This step used to recovery code when you clear code careless.

Press and hold the left two buttons (lock and mute label) at same time and last approximately 3 seconds, then LED indicator flashes three times, followed by a continuous fast blinking, original remote control codes have been restored.

The alternate way to recovery code step is clear the codes and relearn them again.

What you want to know ?