Wireless 1 to 2 A2DP 3.5mm jack inout bluetooth audio transmitter

Connect this transmitter with Bluetooth Devices(Bluetooth Headsets), wireless music can be played.

 

1, Switch the ON/OFF bar to ON side, after 1s of red light on, the device will process reconnecting mode;
The blue light rapidly flash for twice and then it starts to flash slowly(Reconnecting time 15s);
If the reconnecting failed, the device will process auto-scan mode, both red/blue lights will be flashing rapidly;
Switch the ON/OFF bar to OFF side,the device will be turn off.

2, Turn the BT Headsets/BT Speaker on,and set them on paring mode, get them near to the FSC-BP401B for couple of seconds, the blue light will be steadily on. It means they are connected successfully.

3, Connect the FSC-BP401B with your phone,PC,MP3,CD Player,tablet PC,TV or other devices with a 3.5mm AUX line, and then you can enjoy the audio sound with the BT headsets/speakers.(See the image below)

4, The FSC-BP401B can connect with two BT audio receiving devices and transfer audio data to these devices simultaneously .
  How To Use: Turn on the first audio receiving device and set it on paring mode, wait for couple of seconds to make sure that it connects with the FSC-BP401B, turn off this audio receiving device afterward. And then connect the second audio receiving device with FSC-BP401B with the same way. And then turn on the first audio receiving device. If they’re all connected successfully, you will see the blue light flashing rapidly for 3 times and then light off for 5 seconds,and so on.

 

5, Please manually turn off the FSC-BP401B when you’re not using it, in case of battery power running out.

*  Since the firmware/profiles that the BT devices(BT headsets for instance) are using might be diverse, the connecting time will be diverse too.

*  If the connection/paring is failed, please turn off all devices and try again accordingly.

 

1, Product Introduction.
The FSC-BP401B is a Bluetooth Audio Transmitter. It’s easy to use and can send all audio signal freely. This product contains a rechargeable battery, can work for 14 hours after fully charged. It can transfer audio signals from PC,TV,or other audio resources to 2 different BT devices(BT Speakers or BT Headsets for instance).

 

 

2, Main Parameters
Bluetooth Version: V4.2
Application: Bluetooth Audio Transmitting
Plug Type: 3.5mm AUX port
One-To-Two: Can connect with two BT speakers or BT Headsets
Transmitting Range: Up to 30m(98.4ft) in open space
Charging Power Supply: USB 5.0V
Power Consumption: a) Less than18mA on regular mode; b) Less than 19mA when connecting with two BT devices; c) Less then 30uA when powered off.
Working Time: About 14 hours
Charging Time: About 40 minutes
SNR: More than 95db

 

 

3, Package Includes
FSC-BP401B  x1
User Guide  x1
3.5mm AUX line  x1
 

4, Charging Guide
This product contains built-in rechargeable battery, supporting long standby/using time. Please make sure it’s fully charged when first using.
A, Plug a Mini-USB charging cable in the charging port, link cable with standard USB power output port(For instance,Phone Charger,USB port on a PC).
B, The charging time is about 40 minutes.
C, The red light will be on steadily when charging,it will be off when fully charged
D, This product can work as usual while it’s being charging.
E, When the charging power is lower than 3.3V, the alarm indicator(red light) will be flashing rapidly for 3 times every 2 minutes.
Please charge this device when the battery power is running low, in case of powered off.