WiFi Extender Long Range 5.8g 4w Sunhans 36dBm WiFi Signal Booster Compatible 5.8GHz Receiver Transmitter Extend WiFi Singal

SKU :0305SH100311

Model: SH58Gi4000P

 1. [Simply plug and play]
Extend the range of your wireless network with the Indoor Wifi Booster Amplifier.

Plug and play connections,no software, no configuration and virtually no setup of software.

2. [Compatible with any 5.8G wireless device]
Our product can support 5.8G Hz WLAN 802.11a,802.11n,802.11ac,5.8G Hz wireless AP, 5.8G Hz wireless bridge,

5.8GHz wireless router, 5.8GHz wireless network card, 5.8GHz wireless monitoring(NVR,DVR),

5.8GHz wireless microphone,RC drones,FPV device etc

3.[Maximum Output power].
The max output power can be up to 4000mW.

This amplfier will boost the receive and transmit (RX and TX) power of your wireless device a whopping 36dBm.

4.About the input power:
(output power of the device = input power of the amplifier),

Sunhans SH58Gi4000 booster input power 0~20dBm(18~19dBm will better),

if the output power of the device is greater than 20dBm or the power is relatively small -2~6dBm,kindly let us know,

we will give the suggestion to solove this question according to your actual situation.

Technical Specifications:

Booster model: SH58Gi4000

Operating range : 5000~5875MHz

Channel width: 20Mhz&40Mhz&80Mhz

Supported standards: IEEE 802.11a/n/ac

Operation mode: Bi-directional, half-duplex, time division duplex

Connector type: To radio SMA female (hole inside).

              To antenna RP-SMA female (pin inside)

Output power: 4000mW (36dBm)

Input power: 0 ~ 20dBm

Transmit gain: 17 ~ 20dB

Receiver gain: ≤12dB

Noise figure: ≤3.5dB typical

Frequency response: ±1dBoveroperatingrange

Power adapter: 12V/2A DC, 100~240V

Operating temperature: -20°C to +70°C

Operating humidity: Up to 75% relative humidity

Material: Cast aluminum

LED light: Power status LED and activity status LED

Booster weight: 133g
Booster size: 9.7 x 6.4 x 1.7cm

Package contents

1 x SH58Gi4000
1 x RG316 cable with SMA connectors (20cm)
1 x 6dBi omni antenna
1 x power supply
1 x user manual 

Shipping Way:

We can ship out the goods by DHL, UPS, FedEx, EMS, Aramex,
China post, HK post and etc.you can choose a suitable shipping way.

Quality Guarantee: A manufacture with professional R&D team, make product with heart.

Affordable Price: the same quality at cheaper price(assure your profit).

Support small orders: help your business from small to big.

Short leading time: 2~5 working days for small order or hot-selling items,15~20 working days for bulk production.   

One-year warranty: for you without trouble of after-sales maintenance;

OEM & ODM are welcome.  

For UAV,Routers,IP cameras, R/C helicopters, planes and cars,Walkie talkies,ZigBee, Robot...
For House, Office,Hotels,Supermarkets, Hospitals,Parking Spaces...
For WiFi Solution & Project : WiFi Hotspot Solutions,Access points,Smart home systems, Smart city IOT, RC Drones Platform,security camera system ...

Security Camera System

1.What is the WiFi signal booster?

A WiFi Signal booster is extends WiFi network coverage space by boosting or amplifying existing signals.

WiFi Signal booster can augment or amplify existing signals( The power of device which connect with WiFi Booster) to extend WiFi network coverage, so that all wireless devices in the extended coverage area can connect to the Internet or similar wireless networks.

If for RC Drones,RC Boat,Rocket, Robot,walkie talkie....,then customer can control the device more far.

This is a unique solution that connect the WiFi Signal Booster with the Customer's Device to extend wifi signal.(Such as AP, 2.4GHz,5.8GHz transmitter and receiver.

How to connect the WiFi signal booster?

The connect way is the Radio end of WiFi signal booster through a cable connect to the signal source (customer device which cause wifi signal ), and the antenna end of WiFi signal booster connect to Antenna.

2.Feature:

Plug and play, no software setup.

Wide application range, compatible with all 2.4GHz,5.8GHz Device.

3. How to find a suitable wifi signal booster?

Firstly,you need to know the frequency of your device. The frequency of a typical WiFi device is single frequency 2.4 GHz, 5.8 GHz; dual frequency 2.4 GHz and 5.8 GHz.

Depending on the frequency of the device, select the appropriate frequency of Sunhans booster.

Secondly,select the product with the corresponding power based on the distance that needs to be amplified.

The larger the power of the amplifier, the larger the coverage.

Usually,For signal coverage should be equipped with an omnidirectional antenna ; For long distance coverage should be equipped with an directional antenna. (For reference only, all subject to the actual situation)(For drone equipment, customers also need to consider the endurance of the drone)

Thirdly, Need to know the output power of the device.

(output power of the device = input power of the amplifier)

Normally, Sunhans' booster input power 0~20dBm or 0~26dBm, the appropriate is 18~20dBm,if the output power of the device is greater than 20dBm or the power is relatively small -2~6dBm,kindly inform us, we will adjust it according to your actual situation.

(It is recommended not to choose the product power close to the set output power,a higher power than the original equipment should be selected to ensure better signal amplification.)

4. Can I install the Sunhans booster myself?

Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.

5. About LED lights.

A flashing green light indicates that the wifi signal booster is powered on.Normal working is a red light flashing or blud light flashing, indicating that the signal booster receives the signal from the device and sends a wifi signal.

6. We can support OEM and ODM, Customization of New features and frequency customization.

Successful cases: 5.8GHz 4W TX WiFi Booster; Digital Control WiFi Booster etc.

If you have special needs or any question, please feel free to contact us, its our pleasure to serve.