Wholesale exhibition booth Connecting Booths pipe and drape
Wholesale exhibition booth Connecting Booths pipe and drape
Pipe and drape trade show booth Design
Usually, trade show booth can be designed in various forms, like the standard liner booth, perimeter booth, peninsular booth, split island booth and island booth. However, according to the actual needs of users, pipe and drape trade show displays can be usually designed in the following three main categories.
1. Single booth design
A single booth is also usually called island booth, this is because there is no connecting booth around. Each booth can be designed at different sizes according to user's actual needs. For example, you can select the most popular booth which has relatively standard sizes. RK offer standard trade show booth pipe and drape with 8 foot Slip-Fit Uprights and 6-10 foot wide adjustable Drape Support Rod. Of course, the booth can be adjusted according to the size of the exhibition hall and floor.
2. Single row in-line booth solutions design
The single row booth design is ideal solutions for layout. The whole solution can be easily finished just by connecting parts onto the single booth. For example, for two booths, just add a single back wall and side wall on the side. One by one, the single row booth is connected. As for the number of booth, you can add up to 24 or more. For the 24 in-line booth, you just need to purchase 25 main uprights. RK can offer standard sized pipe and drape for you needs. The whole booth system can be finished by one person very fast. Only several minutes are needed for each booth.
3. Back to back double row booth solutions design
The back to back double row booth solution is more popular, money and time-saving. Every two booth share the same back wall and the neighboring booth share the same uprights and side wall. They can be easily connected and combined. Less time is needed and more money is saved than the single row booth if with the same booths. For example, only 13 main uprights are needed for a 24 booth back to back double row booth.
How to design trade show booth with pipe and drape
When one single booth is finished, users can the setup another just by connect the neighboring uprights and cross bars. For example, users can add two additional smaller sets of bases, uprights, cross and drapes on the opposite side of a single booth. Then there are two booths sharing the same backdrop. Similarly, another set of single drapes uprights, cross bars and drapes and side wall can be easily added to form another.
Why RK's pipe and drape for trade show booth
There lots of reasons we could say, too many to list all here. First, we are absolutely designer and manufacturer. The price can be the lowest in the market you could find in the market. This is because our manufacturing base is set up in China and our stream line management ensures the highest efficiency and the lowest cost.
Another is firmly related to our powerful design capability. We now could not only keep up with the latest product trend, but also upgrade our products according to actual need. Of course, we can also design the style you require. No matter what sort of trade show booth you are looking for, we can custom make for you.
|
Ajustable Upright(Height)--Aluminum
|
|
| RKV1-TS610 | 6' - 10' adjustable upright |
| RKV1-TS712 | 7' - 12' adjustable upright(Standard Height) |
| RKV1-TS814 | 8' - 14' adjustable upright (Standard Height) |
| RKV1-TS916 | 9' - 16' adjustable upright (Standard Height) |
| RKV1-TS1120 | 11' - 20' adjustable upright |
| RKV1-TS1222 | 12' - 22' adjustable upright |
| RKV1-TS1324 | 13' - 24' adjustable upright |
| RKV1-TS1426 | 14' - 26' adjustable upright |
|
Telescopic Crossbars(Width)--Aluminum |
|
| RK-TDS610 | 6' - 10' TDS(stops at 8' & 10') |
| RK-TDS712 | 7' - 12' TDS(stops at 10' & 12')(Standard Width) |
| RK-TDS814 | 8' - 14' TDS(stops at 10', 12' & 14') (Standard Width) |
| RK-TDS916 | 9' - 16' TDS(stops at 12', 14' & 16') |
Pipe and Drape detail phothos
Specification of Pipe and Drape System:
1.Base plates
Foundation for the pipe and drape system. pipe and drape systems starts with steel bases assembly. Bases are offered in various sizes and weights and selected based on the weight and heights of drapes to be hung.
2.Upright(Pillar)
We offer one, two, three selections of slip-lock adjustable uprights that range from 3' -24' high (0.9 m - 7.2 m), The end of the upright with 4 slots which can be build at four sides. Also offering application for establishing system side by side. The special upright we owning is the pin was insert into the pipe, stronger and more stable it is.
3.Crossbar(Drape Support)
How far do you need to go horizontally? Room, Hall, Venue or outdoor place. A complete selection of adjustable horizontal drape supports - Crossbar ranging from 2-3' to 9'-16' wide. They are designed to meet any room size and will support the chosen drape.Once the hardware has been established, the drapes are selected for each horizontal section and sleeved on with ease.
4.Fabric Drapery
We are the professional event drapery manufactory and have been in the area for years.
Drapery are available in various color and weight. Chiffon, Velvet, Velour, Poly Premier and so on.
Remark: Please contact me for how to calculate the length of the drapery!
Upright+Crossbar+Base Plate+Colorful Drapes= Economic, practical and portable PIPE & DRAPE
1.Reliability
We have been designing and manufacturing flight cases for near 20 years. Our quality products have well met demands of all clients around the world.
2.Faster Delivery
With our own factory and product line, Our standard prodcuts can be finished within 7days and those custom-made within 8 days.
3.Lower Price
We have our own factory and massive production line. This ensures that we can procure all materials at much lower price than our competitors.
We are professional in manufacturing and marketing flight cases, stage systems, pipes and drapes, dance floors and truss facilities.
Established in 2001, Shenzhen Smile Technology Co., Ltd. is a leading manufacturer of flight cases, custom road cases, rack cases, portable stages, lighting trusses, adjustable uprights, trade show equipment, audio visual backdrops and material handling dollies in the industry. Smile Technology is committed to the idea of "Quality, Service and Delivery". With an extensive line of stock items, we can meet your most urgent requirements.
Contact:
1) Send inquiry to us directly.
2) Email : rk(at)flightinthecases.com (change "at" to "@")
3) Website: www.flightinthecases.com I www.sfhk.en.alibaba.com
As these prodcuts can be customized , if you require some additional features please feel free to get in touch with our sales team.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier