Wholesale STD medical rapid diagnostic NGH/Gonorrhea test kits

strip: 2.5, 3.0

cassette: 3.0, 4.0

Gonorrhea Test is a rapid direct binding test for the visual detection of gonorrhea antigen, in the secretory specimen and urine from urogenital system, as an aid in the diagnosis of gonococcus infection.

1. The test kits can be stored at room temperature (4 to 30℃) in the sealed pouch to the date of expiration.

2. The test kits should be kept away from direct sunlight, moisture, and heat. If the test kit package was refrigerated, allow it to reach room temperature first before usage.

3.Do not freeze.

1. Test kit  

2. Extraction Solution  A 

3. Extraction Solution  B

4. Package Insert  

5. Microtube(if customer needs)

6. Swab(if customer needs)

Specimen Collection

1. Use a swab to collect specimen in the following suggested method:

a) Male patients: Swab discharge from the opening of the urinary tract. If no discharge is present, insert the swab 2-3cm into the urinary tract, gently move a few turns and retrieve the swab.

b) Female patients: Swab discharge from the vaginal opening, then insert swab into vagina for half a minute and retrieve the swab.

2. Place the swab into a microtube and add 6 drops of  extraction Solution A on the

swab, rorate swab and squeeze. Discard the swab into an appropriate biohazard disposal container. Then add 6 drops of extraction Solution B into the microtube and mix well. Specimen collected in the diluent should be stored at 4-8℃and tested within 24 hours.

Test Procedure

1. When you are ready to begin testing, open the sealed pouch by tearing along the notch. Remove the test kit from the pouch.

2. Using the pipette provided, dispense 3 drops of the extracted sample onto the sample well of the cassette.

3. Read results at the 10^th minute. Do not read results after 15minutes 

Interpretation of Results

1.Negative: Only one colored band appears on the control (C) region. No apparent band on the test (T) region.

2.Positive: In addition to a pink colored control (C) band, a distinct pink colored band will also appear in the test (T) region.

3.Invalid: A total absence of color in both regions is an indication of procedure error and/or the test reagent deterioration. Repeat the test with a new kit. 

1.For in vitro diagnostic use only.

2.Patient specimens may contain infectious agents and should be handled as though

capable of transmitting disease. Wear disposable gloves throughout the specimen

collection and assay procedures.

3.Do not use the test kit beyond the expiry date.

4.The test device should not be reused.