Wholesale Kraft Paper

Kraft paper or Kraft is paper or paperboard (cardboard) produced from chemical pulp produced in the Kraft process.

Sack Kraft paper, or just sack paper, is a porous Kraft paper with high elasticity and high tear resistance, designed for packaging products with high demands for strength and durability.

Pulp produced by the Kraft process is stronger than that made by other pulping processes; acidic sulphite processes degrade cellulose more, leading to weaker fibres, and mechanical pulping processes leave most of the lignin with the fibres, whereas Kraft pulping removes most of the lignin present originally in the wood. Low lignin is important to the resulting strength of the paper, as the hydrophobic nature of lignin interferes with the formation of the hydrogen bonds between cellulose (and hemicellulose) in the fibres.

Kraft pulp is darker than other wood pulps, but it can be bleached to make very white pulp. Fully bleached Kraft pulp is used to make high-quality paper where strength, whiteness, and resistance to yellowing are important.

Manufacture

Wood pulp for sack paper is made from softwood by the Kraft process. The long fibres provide the paper its strength and wet strength chemicals are added to even further improve the strength. Both white and brown grades are made. Sack paper is then produced on a paper machine from the wood pulp. The paper is microcrepped to give porosity and elasticity. Microcrepping is done by drying with loose draws allowing it to shrink. This causes the paper to elongate 4% in the machine direction and 10% in the cross direction without breaking. Machine direction elongation can be further improved by pressing between very elastic cylinders causing more microcrepping. The paper may be coated with polyethylene (PE) to ensure an effective barrier against moisture, grease and bacteria, although recyclability is hindered. Zein coatings are also water resistant but allow better recyclability.
A paper sack can be made of several layers of sack paper depending on the toughness needed.
Kraft paper is produced on paper machines with moderate machine speeds. The raw material is normally softwood pulp from the Kraft process.
Maintaining a high effective sulphur ratio or solidity is important for the highest possible strength using the Kraft process.
The Kraft process can use a wider range of fibre sources than most other pulping processes. All types of wood, including very resinous types like southern pine and non-wood species like bamboo and kenaf can be used in the Kraft process.

Qualities
Normal Kraft paper is strong and relatively coarse. It has high tensile strength. The grammage is normally 40–135 g/m2.
Sack Kraft paper, or just sack paper, is a porous Kraft paper with high elasticity and high tear resistance, designed for packaging products with high demands for strength and durability.
Absorbent Kraft paper is made with controlled absorbency, i.e., a high degree of porosity. It is made of clean low kappa hardwood Kraft and has to have good uniformity and formation.
Spinning Kraft paper is an especially strong type of Kraft paper with relatively low grammage (40 g/m2). This paper requires the best possible machine direction strength and cross-machine elongation. This is done by high fibre orientation on the paper machine.
Hunting cartridge paper is a Kraft paper used in shotgun shells. This paper needs a high tensile strength in the machine direction, which is the axial direction of the cartridges. In the cross direction, the cartridge is supported by the gun-pipe, but a sufficient elongation is needed. The body of the cartridge is wound of a Kraft paper of 80–120 g/m2, which is further covered by an outer sheet of 60–80 g/m2 with colour and printing.
Candy wrapping paper and twisting paper are thin 30–40 g/m2 kraft papers and are mostly flexor or offset printed. These papers require good strength, with highly oriented fibres. Twisting paper is mostly opaque and often supercalendered.

Applications
Main articles:

Paper bag and Paper sack as a plastic hazard free paper in paper sacks for cement, food, chemicals, consumer goods, flour bags.

Electrical insulation in large oil-filled transformers.
Paper grocery bags, multiwall sacks, envelopes and other packaging.
An inexpensive material for lining particleboards.

The base paper for sandpapers wrapping for flower bouquets.