White motion sensor detectors switch, 100-240V wall mounting infrared pir motion sensor BS033C
White motion sensor detectors switch, 100-240V wall mounting infrared pir motion sensor BS033C
Welcome to use Time delay pir sensor switch(BS033C)!
Noted: This product only works in the dusk or evening when the ambient light is less than 20 LUX or no any light in the surrounding environment.
The product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install.
| Power Source: 110 -240V/AC | Detection Range:180° |
| Power Frequency: 50/60Hz | Working Temperature: -20°C~+40°C |
| Ambient Light:: < 20LUX | Working Humidity: <93%RH |
| Time-Delay: min: 10sec±3sec | Installation Height: 2.2-4m |
| Max: 7min±2min | Power Consumption: 0.45W (work) 0.1W (static) |
|
Rated Load: 1200W (incandescent lamp) 300W (energy-saving lamp) |
Detection Motion Speed: 0.6 ~1.5m/s |
- It can only work in the ambient light less than 20LUX (dark).
- Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic (set time).
- Time-delay adjustment: It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 7min±2min.
- The switch: The switch is “ON”,“OFF”,“AUTO”.
- Hot-selling Mini Pir sensor switch
INSTALLATION: (see the diagram)
- Shut off the power.
- Loosen the connection column on the bottom of sensor, plug the wire into connection hole, tighten the screws; unload the surface of sensor, connect the sensor into connection box.
- Cross the installation screws into installation hole of sensor, aimed at the hole of connection box, tighten the screws, cover the surface of sensor.
- Switch on the ower then test it.
- 220V Pir motion sensor switch for led light
CONNECTION-WIRE DIAGRAM
- Set the function switch to “ON”, turn the TIME knob anti-clockwise on the minimum after taking the board-face off.
- Switch on the power, the lamp should be on;
- Set the function switch to “OFF”, the lamp should be off immediately, all functions should be in “stop” state.
- Set the function switch to “AUTO”, after 30sec later, it enter into working position, the lamp will be turned on after receiving the inductor signal. Under no inductor signal condition, the lamp should be off within 5~10sec, the lamp should be on again after 5sec.
NOTES:
- Electrician or experienced human can install it.
- The unrest objects can’t be regarded the installation basis-face.
- There aren’t hinder or unrest objects effecting detection in front of the detection window.
- Avoid installing it near temperature alteration zones, for example: air condition, central heating etc.
- Please don’t open the case for your safety if you find the hitch after installation.
- If there are some difference between instruction and the function the product has, please give priority to product and sorry not to inform you additionally
- Ceiling motion sensor switch
♦PACKING: Neutral packing with new carton or according to customer requirments.
♦PAYMENT: T/T,Paypal,West Union,30% deposit, 70% balance before delibery.
♦LEAD TIME: Sample in 1-5 working days and large order in 12-15 working days.
♦TRANSPORT: By DHL/UPS/FEDEX, Air cargo or Sea shipment.
♦PORT OF SHIPMENT: FuTian,Shenzhen,China.
♦MOQ: 1 piece. Providing DISCOUNT and OEM service for large order.
Establish in 2009 in ShenZhen, doing LED components, LED lighting, Motion Sensor Switch, OEM &ODM Product service. Nowadays BESTER is one of TOP 10 professional manufactures of LED components and Motion Sensor Switch in China.
Bester has her factory, and have necessary requirement for the production steps and test steps, we call it well regulated, So we can fast & flexible for customer requirement.
Our Advantages:
Factory proceed capability and test mechine:
All of our product are produced by our private moulds, and we have lots of test machine,
with rich experience in ODM, we can do ODM service for our customers with sucessful cases
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier