Product Pictures
Fan Guard
Use Environment
Operating Voltage | 10.2V~13.8V 20.4V~27.6V |
Operating Temperature/ Humidity | -10°C~70°C 35%~85%RH |
Storage Temperature/ Humidity | -40°C~80°C 35%~85%RH |
Optional Function
1. Waterproof Level: IPX5~IP67, fans could be work in wet environment, outdoor or under water with waterproof protection.
2. Wire leading: 2 wires(red wire:positive;black wire:negative)
3 wires(red :positive;black :negative;yellow: PWM)
4 wires(red :positive;black :negative;Yellow :PWM;white:FG)
3. Additional function: auto-restart, temperature control speed, speed detection, stoppage alarm, waterproof etc.
4. We default 220mm wire length without connector, could be customized as your request. we just need the picture of connector and rank of wires for confirm.
Fan Specification
Model NO. | Bearing System Type | Rated Voltage (VDC) | Speed Type | Rated Current (A) | Rated Speed (RPM) | Air Flow (CFM) | Aire Pressure (mmAg) | Noise Level (dBA) | Weight (g) |
FD06010 | B/S/D | 5 | H | 0.23 | 3800 | 15.28 | 2.16 | 30 | 30 |
FD06010 | B/S/D | 5 | M | 0.2 | 3500 | 14.13 | 1.82 | 26 | 30 |
FD06010 | B/S/D | 5 | E | 0.18 | 4200 | 17.32 | 2.45 | 32 | 30 |
FD06010 | B/S/D | 12 | H | 0.14 | 3800 | 15.28 | 2.16 | 30 | 30 |
FD06010 | B/S/D | 12 | M | 0.13 | 3500 | 14.13 | 1.82 | 26 | 30 |
FD06010 | B/S/D | 12 | L | 0.11 | 3000 | 12.26 | 1.22 | 32 | 30 |
FD06010 | B/S/D | 24 | H | 0.11 | 3800 | 15.28 | 2.16 | 30 | 30 |
FD06010 | B/S/D | 24 | M | 0.1 | 3500 | 14.13 | 1.82 | 26 | 30 |
FD06010 | B/S/D | 24 | L | 0.08 | 3000 | 12.26 | 1.22 | 32 | 30 |
Production Equipment
Production Process
Shipping
Lead Time
1. Samples: 3-7 working days.
2. Mass production: 10-15 working days.
3. Waterproof fan need 1 more week.
Payment
We accept payment by T/T, Paypal or Western Union.
100% payment for sample orders.
30% deposit and 70% balance before shipment.
Guarantee:
3 years warranty for ball bearing fans.
2 years warranty for hydraulic bearing fans.
1 year warranty for sleeve bearing fans.
Sevice:
-OEM service based on MOQ1000pcs;
-100% test before shipping;
- material and waterproof material optional;
-The defective rate is less than 5%;
-Provision of engineering services;
-Customized service can be provided.
1. Are you a manufacturer or a trading company?
2. What kinds of products supplied by your factory?
3. What are kinds of information provided by the customer before inquiry?
4. What can I do if we can not find the suitable fan model in the fan list?
5. Can I have samples for testing before ordering products?
6. Can we put our company logo on the label?
7. How do we carry out quality control?
• Usually, there are two ways to monitor reliability during the manufacturing process.
a. Early Life Test
This is used as a mean of process control aimed at identifying any latent manufacturing problems and determining the effectiveness of burn-in. Every day, 5 samples will be picked up randomly from one of the production lines for burn in at 50°C+/-5°C for 24 hours.
b. On-going Reliability Demonstration
This is a longer-term program aimed at providing data on continuous basis to demonstrate the reliability of product. 10 units per month are randomly collected from one of the production lines for burn-in for 168 hours at 50°C+/-5°C. Units are monitored and tested on daily basis. Failed units will be analyzed and corrective actions taken where necessary.