Wearable 4G WIFI 1080P Wireless Security USB 3 hours Monitor action camera Camcorder for Multi-person remote video conferencing
|
Functions | Introduction | |
A | Battery Indicator Lamp |
When the battery is charged 0%, no light on; When the battery is charged 0-25%, it will be blinking green; When the battery is charged 25-100%, it will be lit green; During its charging, the indicator lamp will blink green twice successively |
B | WIFI Indicator Lamp |
When WIFI is off, no light on; When you turn on or off WIFI, it will be blinking red; When WIFI is on, it will be lit red. |
C | Power/Mode Button |
Press and hold for 2 seconds to turn on or off the camera; when the camera is on, press the button once to switch the Video, Photo and Time Shifting shooting mode. |
D | WIFI Button | When the camera is on and WIFI is already registered, press and hold WIFI button for two seconds to switch the AP/Cloud modes. The WIFI will close automatically if the Cloud mode connection fails. |
E | USB Lid | Include charging port, Micro SD slot, and reset button |
F | DC Power Plug Lid |
DC Power Plug Lid |
G | Status Indicator Lamp |
When the camera is in the Video mode, it will lit red; while the video is recording, it will blink red; When the camera is in the Photo mode, it will lit blue; while the photo shooting, it will blink blue once; When the camera is in the Timelapse shooting mode, it will lit yellow; and whenever you take a photo, then the yellow light will blink once; When updating the software, it will blink pink. |
H | Loudspeaker | Bluetooth 4.0 |
I | Shooting Button |
When the camera is on, press shooting button once to start or stop shooting. |
Start Using
Camera
Please charge the camera before the first use of it.
Charge the Camera
• Take out the camera and the Micro-USB cable.
• Connect the USB cable to computer to start charging the camera;
• During charging, if the battery is not fully charged, the battery indicator lamp blinks green twice successively; but if the battery is fully charged, the indicator lamp keeps green lighted on.
Install Micro SD Card
• Open the USB lid on Micro SD card slot;
• Insert a Micro SD/SDHC card with Class 6 or higher (max memory of 32 GB) in the direction of sign on the camera and push the lid until it is closed.
• Put on the USB slot protection cover.
• Do not apply or remove the Micro SD card during the camera is switched on.
Use the Camera
• Be sure the battery is fully charged and Micro SD card is inserted before using the camera.
• Press and hold the power/mode button for a while to turn on the camera.
• When the camera is on, press the power/mode button once to convert its shooting mode.
• The shooting modes include Video, Photo, and Timelapse shooting mode;
• After choosing the video shooting mode, press the shooting button to start recording or shooting. Press it again to stop.
• When the Photo mode is chosen, press the shooting button once to take photo.
Use WIFI
When the camera starts up but doesn’t start recording or shooting, press WIFI button once to turn on or off WIFI.
Camera Specification
Resolution Ratio: 1080P/30FPS 720P/30FPS
Video Format: .MP4 (H.264 Codec)
Sensor: CMOS
Dept of Field: 0.8 Meter - Infinite
Angle of Lens (Opposite Angle): 87°
Pixel: 8 Megapixel
Microphone: Built-in Microphone
USB: Micro-USB
External Memory: Micro SD, SDHC MAX Memory 32 GB
Compatibility: Windows 7 or above/MAC OSX10.5 or above
Size: 176.5X174.8X27mm (Belt not include)
Weight: 97g
Power Supply: Built-in Lithium Battery, 1160 mAh
Shooting Time: Continuous 180 Minutes of HD Video Shooting after Full-charged
This is Bruce from Shenzhen Sodex trade Co.,ltd .We sales Drfit Action Camera , which is perfect suit your needing .
If you are interested in our country products,please kindly contact with me for more information .
What'sApp/Wechat:+8618818596589
https://www.foream.com