★Please read the manual before operating this cabinet, or consult the dealer guidance. 1. Firstly please check whether the components are properly positioned, confirm the power outlet can withstand above 1200W, then plug.
2. Store 80% of water in the lower water storage bucket (high water level line), and start pumping water to the tank, meanwhile the water level in the lower water tank should not exceed 60% (water level line) ,while the pump is not working, the water will flow down into the lower storage bucket, avoiding water overflow.
Note: usually pay attention to the water level, not less than the minimum water level line, so as to avoid pump idle burned. (Water will reduce, because of moisture evaporation and absorption of plant roots).
3. After the water level meets the standard, firstly adjust the nutrient solution concentration (EC value) and inject the suitable nutrient solution slowly and respectively, secondly put the planting plate well and put down the planting basket in the plate, thirdly put the planting sponge into the planting basket( Planting sponges already have seeds or seedlings).