This product range covers fluids based on water-glycol solutions.
Water glycol fluids consist of a solution of water, ethylene or diethylene glycol, a high molecular weight polyglycol and an additive package. The water-to-glycol mixture typically contains 38 to 45 percent water. These fluids usually contain red or pink dye to aid in their identification. With water in the fluids formulation, evaporation is ongoing and upper operating temperature limits must be considered. Checks must be made periodically of the water content. The fluids typical operating temperatures should be kept below 150 degree. The polyglycol is a water-soluble polymer thickener, which can be formulated to cover a wide range of viscosities. The resulting viscosity-temperature properties are Newtonian and give water glycols good low-temperature cold-start pump wear protection as well as minimizing cavitation. The additive package imparts corrosion resistance, metal passivation, seal and hose compatibility, oxidation resistance, antimicrobial properties and antiwear properties. With a density of about 1.0, mineral oil contaminants may float on the fluid surface and be skimmed off. Finally, water glycol fluids have better thermal transfer properties over other fire-resistant fluids.
Water-glycol fluids (ISO HFC) are compounded of:
>35 percent to 45 percent water to provide resistance to burning.
>A glycol (a synthetic chemical of the same family as permanent anti-freeze ethylene or other glycols).
>A water-soluble thickener to improve viscosity.
Applications: Water glycol fluids usually have an operating range up to 2000 psi at less than 150°c. Their lubricating quality is very good where loads are moderate and where only hydrodynamic lubrication is involved. When the application has high bearing loads and extreme boundary lubrication conditions, higher wear rates should be expected. Typical applications include: 1.Diecasting Machines 2.Coke Furnace Door Openers 3.Ladle-tilting Mechanisms 4.Furnace Chargers and Dischargers 5.Basic Oxygen Furnace Hydraulics 6.Fork Lifts 7.Straddle Trucks 8.Electric Welders 9.Rod, Tube and Strip Mills 10.Hot Metal Shears 11.Aircraft Carrier Catapults 12.Airport Air Bridges 13.Continuous Metal Casters
No desirable products?
Sourcing assistant>
How to start your business
Step 1
Find your interested products by search keywords
Step 2
Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
Step 3
After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
Step 4
Set up meeting with the Chinese supplier without language barrier