Water activated pu resin cured fiberglass armored cast tape 5x150cm
Armor-Wrap is used in emergency repair and protection of pipelines which carry water, gas and chemicals in civil and military industrial use. It has played an important role in the fields of power supply, chemicals transportation, marine and communication engineering by reducing losses caused by pipeline leaking or damage, and has become the necessary part in emergency repair and pipeline maintenance. The quality and the performance of our products have been proved excellent by some authoritative institutes and big customers.
Features:
l Water-activated or can slowly cured in atmosphere.
l Non-toxic, non-irritative.
l Bonds to rubber, PVC, polyester, metal, fiberglass and concrete.
l Sets in 20-30 minutes; sets under water.
l Resistant to water, most chemicals and fuels; Moisture Remaining Strength over 85%.
l Resistant to mechanical abrasion.
l Resistant to internal pressure up to 1000 kPa.
l Easily spread almost without tension.
l Nice bonding ability of ends (auto-adhere to previous layer).
l Packed in high quality foil pack.
l Shelf-time: 2 years from the date of manufacture.
l Structure of repairing tape :fiberglass,polyurethane resin.
Application Instruction:
1. Clean the repair area with sand paper.
2. Wear protective gloves .
3. Remove the roller of the tape from the vacuum bag and immerse it in water at room temperature for 2-5seconds..
4. Press the tape roller out of excess water.
5. Start wrapping the roll around area of needed repair.To repair a broken part apply at least 6wraps over the break and at least 2-4inches of support on both sides of break.
6. Wrap the metallic strip carefully around the wrap to secure and tighten the layers. Once wrap is hardened you can remove it .Or it may be left in place.
Specification | ||
Color | Centimetre | |
F01-100 | Black or White | 2.5cm x100cm |
F01-300 | Black or White | 2.5cm x300cm |
F02-125 | Black or White | 5cmx125cm |
F02-150 | Black or White | |
F03-150 | Black or White | 7.5cmx150cm |
F04-150 | Black or White | 10cmx150cm |
F05-150 | Black or White | 12.5cmx150cm |
F06-150 | Black or White | 15cmx150cm |
F02-360 | Black or White | 5.0cm x 360cm |
F03-360 | Black or White | 7.5cm x 360cm |
F04-360 | Black or White | 10.0cm x 360cm |
F05-360 | Black or White | 12.5cm x 360cm |
F05-1000 | Black or White | 12.5X1000cm |
F06-360 | Black or White | 15.0cm x 360cm |
F02-460 | Black or White | 5cmx460cm |
F03-460 | Black or White | 7.5cmx460cm |
F04-460 | Black or White | 10cmx460cm |
F05-460 | Black or White | 12.5cmx460cm |
F06-460 | Black or White | 15cmx460cm |
See chart below for cure time and temperature.(Full hardening is achieved in 12hrs)
Cure Time and Temperature Table
Hours | F | C |
0.5 | 842° | 450° |
1 | 460° | 238° |
1.5 | 240° | 116° |
2 | 130° | 54° |
2.5 | 70° | 21° |