Water Resistance 5mins Fast Dry Epoxy AB Glue for Plastic/Stone/Glass stick
Jinhua 650/620/630 series is 1:1 mixing ratio, specially designed for stick purpose, for metal to metal, metal to plastic, plastic to glass, etc, with easy operation and verious curing time from 5 minutes to 2 hours, it can meet different applications needs. Main features: two components, 1:1 mixing ratio, water resistance, durable, high hardness, transparent.
Epoxy Resin 650AB
Feature
Epoxy resin adhesive 650AB can be cured under normal temperature and high temperature, easy to operate, with super fast curing, high bonding strength.
Application
650AB can be widely used for adhesion for hard materials such as metal, stone, electronic components, wood, etc..
Properties before Hardening
|
Part |
650A |
650B |
|
Color |
Transparent |
Transparent |
|
Specific gravity |
1.15 |
1.05 |
|
Viscosity (25℃) |
8000-12000CPS |
5500~8500CPS |
|
Mixing ratio |
A: B = 100:100(weight ratio) |
|
|
Hardening conditions |
25 ℃×5 min (2 g) |
|
|
Usable time |
25℃×2min (10g) |
|
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Properties after Hardening
|
Hardness, shore D |
<85 |
|
Withstand voltage, KV/mm |
22 |
|
Flexural strength, Kg/mm2 |
27 |
|
Volume resistivity, Ohm3 |
1x1015 |
|
Surface resistance, Ohmm2 |
5X1015 |
|
Thermal conductivity, W/M.K |
0.56 |
|
Induced electric loss, 1KHZ |
0.42 |
|
Withstand high temperature, ℃ |
140 |
|
Moisture absorption, % |
<0.15 |
|
Compressive strength, Kg/ mm2 |
11.4 |
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.
Contact: Kerry
Tel(whatsapp) : +86-13823546652
Wechat: hellojhm
Skype: jin.kerry
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier