Water Drop Hammer Mill Corn Crusher Feed Hammer Mill for Flour Soybean Meal Grinding
Introduction of Water-drop hammer mill | dripping Hammer Mill :
MONA SFSP series of dripping hammer mill is mainly used in feed industry, food and chemical industry with good performance and high quality, it is applicable for grinding all kinds of grains, wood chips, rice hull, straw, sunflower, grass, cotton stalk , corn stalk and so on.
MONA SFSP series of dripping hammer mill is especially suitable for matched chaff processing in middle or large grain processing plants.
Animal feed crusher can not only be used for grinding wood, but also be used for grains like husks,maize, wheat,soybeans, peanuts etc, which can be made into feed pellets. The special water drop design hammer mill can ensure a large space for grinding chamber and improves working efficiency by 40%.
1. The water drop hammer mill is of tear circle shape, effectively eliminating the circular flow
in the grinding process and getting higher capacity.
2. The bottom of water drop hammer mill is fitted with U-shape double grinding structure, further improving the capacity with
evener particle size.
3. All of our rotors pass an accurate dynamic balancing test, resulting in low noise and smooth running.
4. Both coarse and fine grinding can be completed by adjusting the distance between the beater and the screen.
5. Beater blade edge is vacuum-welded by special alloy steel, resulting in long service life.
6. The imported components are used for key parts, resulting in long service life and low maintenance cost.
7. The moving full-wide operation door facilitates maintenance and replacing of beater.
Working process of Water-drop hammer mill | dripping Hammer Mill :
To crush the material with this machine is suitable from the top feeding mouth .The feeding guide board guide from the left or
right into the crushing chamber, then in the blow of high-speed rotating hammer and the friction the sieve plate,it gets
ground gradually.until the diameter is smaller than the screen mash,the feed goes out from the discharge part through the
screen mesh under the action of centrifugal force and air flow.
Technical Parameters of Water-drop hammer mill | dripping Hammer Mill :
Model |
Power |
Capacity |
Rotor diameter |
Rotate speed |
Weight |
SFSP56*36 |
18.5KW |
1.5-3 t/h |
560MM |
2950RPM |
680KG |
Remark:Optional Model:SFSP50*28 SFSP56*32 SFSP56*40 SFSP60*60 SFSP60*80 Optional Power:15KW 30KW 37KW 55KW 75KW 90W 110KW |