2. Put the cast padding or stockinet on the fixed part.
3. Open the package and take out the cast, Immerse the cast in room temperature water at 3-5 seconds and press 2-3 times, take it out and squeeze out the excess water.
4. Wrap the cast spirally on injured parts with 2~3 layers, overlapping the previous layer by one-half or two- thirds the width of the roll.
5. shape according to the need, smooth and rub the surface to achieve good contact between layers.
6. Use the electric cast saw to cut and remove it
Storage & warranty :
* Be careful not to break the packaging
* Stored in a cool, dry and ventilated atmosphere. The proper temperature is 15-30℃ and the humidity should be less than RH60%.
* Be careful not to break the packaging
* Stored in a cool, dry and ventilated atmosphere. The proper temperature is 15-30℃ and the humidity should be less than RH60%.
* Shelf-life: 2 years
