Use | Solid-liquid separation |
Material | SS304/SS316 |
Character | Shaftless/shaft |
Outer diameter of screw | 22mm-750mm |
Capacity | 18-126m3/h |
Operation | Full automatic |
Protection Level | IP55 F |
Electrical component | Schneider/Omron/Customize |
Motor | SEW/NORD/Customize |
Warranty | 1 year |
Screw Type Sand and Water Separator Technical Description |
|
Main structure |
1.The driving unit use s shaft-amounted reduction box connected with screw axis. On the top of sand convey chute, supporting bearing is installed. This bearing device is waterproof and dustproof and is convenient for lubrication and maintaince. 2.Diameter of screw axis is Φ280mm. using shaftless screw ensures smooth material conveying. 3.Screw sand conveying chute is U-shape section, spiral chute diameter is 320mm, installation angle is about 25°. The feed port is open and other parts are sealed with covers. Disassembly mode is used. Discharge port is set at upper part which is 1.75m above the ground. 4.Screw sand conveying chute is integrated with water tank. It has enough strength and rigidity, no leakage. The overall structure is supported by profile steel fixed on the concrete foundation. |
Working principle |
Sand and water mixture from the sand-basin enters into the sand and water separating chute where water overflow and sand settle down. Rotating screw axis convey sands along the 25° spiral chute to top discharge port. During the conveying, further separation is made to ensure water content of sand at discharge port is not more than 60%. |
Reliability and durability of the equipment |
1. Mean time between failures of the equipment is over 20000 hours. 2. Service life of the overall machine is over 25 years. 3. Maintenance for the equipment shall be made once per year; service life of reduction box and bearings must not be less than 15 years; service life of electrical devices is note less than 5 years. |
Scope of supply |
Overall machine supply: including Outlet,No-shaft Screw,U type Trough,Cover,water-tank,transmission system |
1.Q:Do you offer after-sales service?
A:Yes. Engineers with more than ten years of after-sales experience will be dedicated to serve you.
2.Q:How long is your warranty?
A:One year after the arrival of the goods. During this period, any damage caused by non-human factors, we will send the damaged parts free of charge.
3.Q:Do you provide OEM service?
A:Yes, Any required logo is available.
4.Q:What certificates do you have?
A:ISO/CE/SGS.
5.Q:What kind of payment do you accept?
A:T/T, L/C, PAYPAL, Cash, D/P, D/A, WESTERN UNIION, MONEYGRAM.
6.Q:What about your delivery time?
A:Normally within 30 days before shipment.
7.Q:What about the package of your export product?
A:We use export wooden case packing with foam inside.