Housing Material | Plastic |
Color | customer required |
Power (W) | 5400 |
Voltage (V) | 220 |
Rate of flow | 5-6L/min |
Out water temperature | 30-60℃ |
Quantity(Pieces) | 1 - 7200 | >7200 |
Est. Time(day) | 30 | Determined in consultation |
TEL : 0574-62532292
Wechat: +86 18983880746
Http: //www.zj-hyd.com
QQ: 1430860237
We guarantee that every product is strictly tested and absolutely safe.
1. Sample order
2. We will reply you for your inquiry in 24 hours.
3. After sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.
SPECIFICATIONS: | ||||||
Circuit breaker | Cable size | Voltage | Power rating | |||
50A | 10mm² | 110/127V | 4000/5400W | |||
40A | 6mm² | 110/127V | 3300/4400W | |||
30A | 4mm² | 220/230V | 5400W | |||
25A | 4mm² | 220/230V | 4400W | |||
35A | 6mm² | 127V | 3840W | |||
Frequency
| 50/60HZ | Out water | 30-60℃ | |||
IP class | IP 24 | Grounding wire | YES | |||
Water flow | 5L/min | Hose and hand | YES |
Problem | Problem reason | Solution |
The water is cold | The selection temperature is in | Put the selection temperature key in the hot or warm position |
No water is flowing through the shower head | The main register is closed or there is air inside the pipes | Open the main register and/or the taps and let the water flow to remove the air. The shower head must be disconnected of the electrical system . |
The shower head is not heating properly even with select key in the not position | The wires do not have the properly size as specified in the | Contact a qualified technician. To check your electrical installation. |
Low voltage: The voltage of your system may be not constant or under the values specified. | Contact a qualified technician. To verify your electrical system. If the nominal voltage of your system are under the values specified by your electric supplier (110~/127~or220V~), contact the utility responsible for your electrical supply. | |
Burn of the element | Wear due to the normal use | Inadequate electric installation |
Inadequate electric installation | Check the voltage and characteristics from the electric installation, correct them and change the element according. |
Q1: Are you trading company or manufacturer ?
A: We are trading company,but we have cooperative factories.
Q2:What certification do you have?
A:We have CE .
Q3: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample but do not free.
Q4:Do you acceptance LOGO printing on products or package?
A: Yes,for mass order, we accept your LOGO on products and package,but for sample will be confirmed with each other.
Q5. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q6: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 30 days if the goods are not in stock, it is according to quantity.