WTM03 is designed for distribution equipment and switchgears; it is used as bus bar and current terminal in different electrical devices.
Power distribution blocks offer a safe,convenient way of splicing cables, providing a fixed junction tap-off point or splitting primary power into secondary circuits.WTM03 series offers DIN-Rail mount installation and an optional hinged safety cover. Optional power distribution block covers provide protection against accidental shorting between poles caused by loose wires, tools, or other conductive material. They also protect personnel from accidentally contacting energized connectors.
For DIN rail or chassis mounting with screws.
Product model | Terminal rows | Terminals/row | L(MM) | W(MM) | H(MM) |
WTM03 2X7 | 2 | 7 | 65 | 45.5 | 51 |
WTM03 2X11 | 2 | 11 | 132 | 45.5 | 51 |
WTM03 4X7 | 4 | 7 | 65 | 89.5 | 50 |
WTM03 4X11 | 4 | 11 | 100 | 89.5 | 50 |
WTM03 4X15 | 4 | 15 | 132 | 89.5 | 50 |
Standard: IEC60947-7-1
Terminal: Brass conductor
Frequency: 50 or 60 Hz
Rated insulation voltage Ui: 500V
Ipk: 20Ka Ie: 125a,160a
Dielectric test voltage at ind. Freq. for 1 min: 2.5Kv
Pollution degree: 2
Cover material: PC
Base material: PA6
Glow wire test(IEC695-2-1)℃: 960