WT2080 LED Power Driver Comprehensive Performance Tester
WT2080 LED power driver meets the national and international standard of GB 24825-2009 and IEC62384-2006 for LED lamp electric performance test requirements. With advantages of high intelligence, convenient use, good stability and high accuracy , it is a new generation of intelligent instrument.
Characteristics
1,Eight window display of input characteristic, output characteristic parameters,visual to read, easy for analysis and comparison. It's suitable not only fortechnology development, but also for test in production field
2, Test frequency response of input, output current is 1MHz. It can accurately measure the various types of LED driving power
3, With high-speed MCU and high-precision A / D for control and measurement, high accuracy
4, Rapid test: Input and output parameter test will be finished in one second
5, It has RS232 communication function. With the special software of the host computer,it can carry out the remote operation control and display the corresponding data. Besides, all measured data and waveforms can be displayed on PC. It provides Chinese and English page operation with the advantages of beautiful interface, easy operation and high intelligence
Technical index
1,Instrument functions
( 1) input characteristic test (AC )
a measurement of input voltage, current, power, power factor, frequency, total harmonic 0 ~ 50 times of each harmonic
component, initial phase angle, the peak phase angle, closing phase angle;
b voltage, current, fundamental wave frequency range: 45Hz ~ 65Hz;
narrow frequency range: 45Hz ~ 5KHz
wide frequency range: 45Hz ~ 1MHz
voltage range: 3V ~ 300V ( CF = 1.67 )
current range: 5mA ~ 2.7A ( CF = 3 )
power range: 0.015W ~ 810W
power factor range 0 ~ + 1
( 2) the input characteristic test ( DC )
a measurement of input voltage, current, power
b voltage range: 0V ~ 500V
current range: 5mA ~ 8A
power range: 0.15W ~ 4000W
ripple current: 5mA ~ 2.5A
( 3 ) the output starting characteristic test ( DC )
a measurement of change curve and data for lamp voltage, lamp current in 0 ~ 2 seconds
b lamp voltage range: 3V ~ 500V
c lamp current range: 5mA ~ 8A
2,Specifications
AC:
items |
Basic error |
Measurement condition |
voltage |
±(0.1%read+0.1%range+1bit) |
Input waveforms: sine wave; Input frequency: 45Hz ~ 65Hz; Instrument calibration within 12 months
|
current |
||
power |
||
Power factor |
±(0.002+0.001/read+1bit) |
|
frequency |
±0.1%read |
|
Harmonic wave (valuable) |
±(0.1%range+5%read) |
|
Lamp voltage |
±(0.1%read+0.1%range+1bit) |
Input waveforms: sine wave; Input frequency: 45Hz ~ 65Hz; Instrument calibration within 12 months
|
Lamp current |
||
Lamp power |
DC:
item |
Basic error |
Measurement condition |
voltage |
±(0.1%read+0.1%range+1bit) |
DC signal Instrument calibration within 12 months
|
current |
||
power |
||
Lamp voltage |
±(0.1%read+0.1%range+1bit) |
DC signal: Instrument calibration within 12 months
|
Lamp current |
||
Lamp power |
||
Ripple current |
±2.5%range |
20~70KHz sine wave signal |
3,Environmental conditions
( 1) environment temperature: 23 C ±2 C
( 2) relative humidity: 55%±20%
( 3) power supply voltage: 220V
♥Cartons are used for inner packing and wooden cases for outer packing.
♥The wooden case has sufficient strength, rigidity and stability.
♥A full range of sea and air logistics system to provide you with the most convenient logistics experience,rapid response to save your time.
There is no 100% satisfication.That is something we cannot reach but something we can have great confidence to get close to.Inventfine people never stop to acheieve this target and hope someday that Inventfine is standard.
Hangzhou Inventfine Instrument Co.,Ltd.Founded in 2001,is a national high-tech enterprise.We devoted to the research,production,sales and technical services of LED lighting source inspection equipment.Many well known domestic and foreign enterprises,R&D institutions and third party testing organizations are our important customers.
♥ Inventfine has been covered in all LED testing instrument in the field of photometry,colormetry and electrics.
♥ We provide testing solutions for electronic components,electromagnetic compatible,electronic safety,light bio safety,environmental safety,DC and AC power supply.
Quaility Assurance
A lot of well-known enterprises at home and abroad, such as PHLLIPOSRAM, GE, TOSHIBA, FSL Electrical and Lighting, CNLIGHTING, OUPU Lighting, NVC-Lighting, TCL Lighting, YUNCHANG Lighting, SUNNY Lighting and others, are Inventfine's customers.
Our products have been sold to more than twenty countries and areas: America, Italy, the Netherlands, Poland, Romania, Malaysia, India, Indonesia, Iran, Turkey, Vietnam, Korea, Hong Kong, Taiwan area and more.
♥We attend various exhibitions every year.Like Yangzhou exhibition in March,Ningbo exhibition in May,Guangzhou exhibition in June.Wide markets both at home and abroad make us receive more and more domestic and international trade concerns. Our company has gone on a steady development road because of all staff's hard work.
♥We will training how to install the machine, training how to use the machine. Welcome to visit our factory.
♥Inventfine has been awarded national high-tech enterprise certificate,ISO9001 certificate,natioanl technology innovation fund support.
♥We are also the Patent pilot enterprise,CE certification,Independent innovation enterprise,supportive membership of the CIE.
♥At present,our company has a number of independent intellectual property rights of the invention patents,utility model patents and software copyrights.
Q: Are you trading company or manufacturer ?
A: We are factory.We have been covered in all LED testing instrument in the field of photometry,colorimetry and electrics,we provide testing solutions for electronic components,electromagentic compatible,electrical safety,light bio safety,environmental safety,DC and AC power supply.
Q:What if we buy your company's equipment but can't use it?
A:We can provide the online training to buyer (In the case directly purchase from INVENTFINE foreign department.)
Q: Do you provide samples ? is it free or extra ?
A: We don't provide samples, but you can come to our company anytime if you have time.
Q: What is your terms of payment and delivery time?
A: 30% as deposit and then other 70% before delivery.goods is ready within 15 days after received the deposit.