WEP 853AAA 3 in 1 digital SMD soldering welding equipment preheat BGA rework station
Feature
1.Using microcomputer processor PID programmable temperature control technology.
2.Preheating station is to use a glaze layer having a high thermal effect, good thermal shock resistance of the ceramic as the substrate, high-quality nickel branded alloy wire once sintering.
It has a high thermal effect, overall good, good thermal stability, uniform heating, high dielectric strength, clean, easy to install and so on features.
3.Air Gun heater use ceramic heater.
heater firmly wrapped around the model ceramic, rapid and uniform heating.
Use the upgraded version fan, the airflow larger than the ordinary fan, spiral out of the wind, long life.
4.Soldering iron part using Imported heater.
heating up rapidly, temperature stability, long service life; antistatic design to prevent electrostatic damag to delicate SMD components.
5.The machine has a self-test function.
full intelligent over-temperature, short-circuit, open circuit, overload and fault display and protection functions.
6.853AAA preheating station using the user-friendly design.
the cover affixed with a high-temperature, insulated protection pads to prevent scalding operation.
Uses magnetic induction technology.
Card board bracket to prevent protective pads suck hood above.
Can rotate 360 degrees, flexible card board.
It is suitable for the circuit boards of different shapes and sizes.
7.853AAA temperature correction function
Adapt to the environmental impact, or replace the heater, soldering iron tips etc. spare parts caused by temperature deviation,can use this function calibration temperature.
The correction temperaturerange is -50 °C ~ +50 °C.
8.853AAA has Celsius / Fahrenheit temperature display function
Meet different market needs to design the temperature display mode, you can choose under customary interest.
Data | |
Input voltage | AC220V±5% |
Maxium power | 1270W |
Preheating station parts | |
Temperature Range | 50~400 °c / 152~752 °F |
Temperature Stability | ±2 °c |
Display Type | LED |
Heating area | 120*120mm |
Hot Air Reworks parts | |
Airflow type | brushless fan spiral out wind |
Air Flow | ≤130L/min |
Temperature Range | 100 °c -480 °c /212°F ~896 °F |
Temperature Stability | ±1 °c |
Display Type | LED |
Handle cable length | ≥100cm |
Soldering Iron parts | |
Temperature Range | 200 °c -480 °c /392°F~896 °F |
Solder iron holder | blue Ferro-alloy iron holder |
Temperature Stability | ±1°c |
Tip of ground voltage | <2mV |
Tip ground impedance | <2 ohm |
Display Type | LED |
Handle cable length | ≥100cm |
NOTE:Due to shippment cann't contain rosin,so the tip cleanner box don't have rosin inside.
WEP 853AAA bga rework station package:
Inner box size 37*38*18cm
Outer carton box size 73*40*39cm
Q'TY 4pcs/ctn
Goods net weight 5.54kg/pc
outer carton weight 23.41kg