WEIHUA Crane 100 ton hydraulic boat crane lift design in gantry cranes
Brief introduction of 100 ton hydraulic boat crane lift:
Lifting Weight: 10-800t
Span: 12-30m
Working Temperature: -20ºC~40ºC
Applications:
100 ton hydraulic boat crane lift can handling different tons boat or yacht (10T-800T) from the shore side, it can be used for the maintenance on the shore side or can put the new boat into the water.
Mainly consists:
The 100 ton hydraulic boat crane lift includes the following items: main structure, traveling wheel block, hoisting mechanism, steering mechanism, hydraulic transmission system and electric control system. The main structure is N type, which can transfer the boat with height surpass crane’s height.
Features:
1.It has soft and firm belt to lift the boat and yacht so that it will never hurt the surface. This boat lifting gantry crane also can put the boat in sequence quickly with small gap between each two boat.
2. For the crane traveling, this crane can move in diagonal direction, it also can steer in 90 degree and put the boat in any designated position according to requirements.
3.This product can be adjusted the width of the main girder according to the boat in case to handling different side boat.
4.This yacht handling crane is of low expense, high performance, easy to operate and maintenance and so on.
5.ow cost on the daily operation, it adopts the soft and firm belt to ensure there is no harm to the boat when hoisting.
6.It can make the boat in order quickly; it also can adjust the gap between each boat according to different condition.
Working Environment of 100 ton hydraulic boat crane lift
1. 3 phase A.C. 50HZ 380:
2. The temperature of the working environments is -20 ~ +45 degrees and.the Max relative humidity shall be less than 95%( with condensation);
3. Wind speed shall be less than 20m/s;
4. Working leave: A3, A4;
5. Special requests are available
Specification of 100 ton hydraulic boat crane lift
100 ton hydraulic boat crane lift | |||
Capacity(t) | Span(m) | Lifting Height(m) | Work Class |
40 | 20 | 9 | A5 |
30 | |||
40 | |||
60 | 20 | 9 | |
30 | |||
40 | |||
80 | 20 | 9 | |
30 | |||
100 to 800 | 20 | 12 | |
30 | |||
40 |
Notes:The foregoing attached table shall only be used for reference. The actual application shall be appropriately modified according to customers' requirements.
After-Sales Service
Our after-sales service provide:
1. 14 months warranty when products leave the factory, or 12 months warranty after installation
and commissioning in addition to the human damage factors.
2. 2 years spare-parts provided for better maintenance.
3.Professional technical staffs provide installation, commissioning and training services.
4.Delivery with English user manual, parts manual, product certification and other relevant certificates.
5.Technical advisory for any time and Engineers available to service machinery overseas.
Company name: | Henan Weihua Heavy Machinery Co.,Ltd. |
Add: | NO.6 Boai Road, Changyuan County Xinxiang City, Henan Province,China. |
Contact person: | Alice Gao |
Mob | 0086 15803872040 |
Tel: | TEL: 86-371-55680119 |
Thanks for your attention! Any interesting also can email to us by below Contact board: