WBB electric MV power factor correction
I General
Our WBB electric MV power factor correction for high voltage is applicable for three phase 3~10kV reactive power concentrating compensation of electrical power system, to increase of power factor, adjust network pressure, reduce loss of distribution system and transformer, enhance active output of power unit, and improve the quality of power supply for power grid.
II Local compensation
No | Type specification | Rated capacity KVAR | Rated current A | Overall reference dimension H×A×B(mm) | Installation reference dimension a x b x c(mm) |
1 | WBB1-6.6-50 | 50 | 4.37 | 1700×750×800 (2000×1100×900) | 700×750×14 (1000×750×14) |
2 | WBB1-6.6-75 | 75 | 6.56 | ||
3 | WBB1-6.6-100 | 100 | 8.75 | ||
4 | WBB1-6.6-150 | 150 | 13.1 | ||
5 | WBB1-6.6-200 | 200 | 17.5 | 1700×800×850 (2000×1100×900) | 750×800×14 (1000×850×14) |
6 | WBB1-6.6-250 | 250 | 21.85 | ||
7 | WBB1-6.6-300 | 300 | 26.2 | ||
8 | WBB1-6.6-350 | 350 | 30.6 | ||
9 | WBB1-6.6-400 | 400 | 35 | ||
10 | WBB1-6.6-450 | 450 | 39.4 | ||
11 | WBB1-6.6-500 | 500 | 43.7 | ||
12 | WBB1-11-50 | 50 | 2.39 | 1700×750×850 (2000×1100×900) | 700×750×14 (1000×750×14) |
13 | WBB1-11-75 | 75 | 4.33 | ||
14 | WBB1-11-100 | 100 | 5.77 | ||
15 | WBB1-11-150 | 150 | 8.66 | ||
16 | WBB1-11-200 | 200 | 11.55 | 1700×750×850 (2000×1100×900) | 750×800×14 (1000×850×14) |
17 | WBB1-11-250 | 250 | 14.43 | ||
18 | WBB1-11-300 | 300 | 17.32 | ||
19 | WBB1-11-350 | 350 | 20.2 | ||
20 | WBB1-11-400 | 400 | 23.09 |
|
|
21 | WBB1-11-450 | 450 | 28.87 | ||
22 | WBB1-11-500 | 500 | 34.64 | ||
Note: numbers in the brackets stand for the size of electric choke |