Volume Resistivity Tester for Plastic, Rubber, Solid PVC,Surface Resistivity Meter
Compliance with standards:
GB/T 1410-2006 "solid insulating materials volume resistivity and surface resistivity test method"
ASTM D257-99 "Test Method for DC Resistance or Conductivity of Insulating Materials"
GB/T 1410-2006 -- Test method for volume resistivity and surface resistivity of solid insulating materials
GB/T 1672-8 Liquid plasticizers -- Determination of volume resistivity
GB 12014 anti-static work clothes
GB/T 20991-2007 Method of test for personal protective equipment shoes
Technical requirements for antistatic shoes and conductive shoes
GB 12158-2006 General guidelines for the prevention of electrostatic accidents
GB 4655-2003 Specification for electrostatic safety for rubber industry
GB/T 1692-2008 vulcanized rubber -- Determination of insulation resistance
GB/T 12703.6-2010 Evaluation of the electrostatic properties of textiles -- Part 6: Fiber leakage resistance
Specification for electrostatic safety of liquid petroleum products
GB/T 15738-2008 Test method for resistivity of conductive and antistatic fiber reinforced plastics
GB/T 18044-2008 Carpet static static behavior evaluation method walking test
GB/T 18864-2002 Antistatic and conductive products for vulcanized rubber industry resistance limit range
GB/T 22042-2008 test method for surface resistivity of anti-static performance of clothing
GB/T 22043-2008 Clothing anti-static performance through the material resistance (vertical resistance) test method
GB/T 24249-2009 Anti-static clean fabric
GB 26539-2011 Antistatic ceramic tile
GB/T 26825-2011 antistatic anticorrosive adhesive
GB 50515-2010 Specification for design of conductive (anti-static) ground
GB 50611-2010 Electronic engineering anti-static design code
GJB 105-1998-Z Electronic Products Anti-static Discharge Control Manual
GJB 3007A-2009 anti-static work area technical requirements
GJB 5104-2004 General requirements for antistatic coatings and electrostatic properties of hoods for radio fuzes
Volume Resistivity Tester for Plastic, Rubber, Solid PVC,Surface Resistivity Meter
An overview,
This instrument for my company 121 upgraded products improved before the instrument can only calculate the resistance need to manually convert the resistivity combined with user feedback requirements simple measurement, especially in the resistance measurement only need to artificially put the sample without conversion results of automatic calculation, sample can be selected and solid, powder, liquid.Three kinds of products can be automatically converted to resistivity products using color 64 bit true color screen display support touch screen selected sample.
Screen display: material resistance current voltage resistivity.This instrument has high precision, rapid display, good stability, easy reading, suitable for rubber, plastic, film, and powder, liquid, and a variety of insulating materials volume and surface resistance, resistivity measurement.
Volume Resistivity Tester for Plastic, Rubber, Solid PVC,Surface Resistivity Meter
Main characteristics
Resistance measurement range wide 1×104Ω ~ 1×1018 dot (14 power above the need to be calculated by current and voltage)
Current measurement range is 2×10-4A ~ 1×10-16A
Small size, light weight, high accuracy
Resistance, current and resistivity are displayed at the same time and are displayed on a large color screen
Direct display resistance and resistivity without conversion only input style thickness can be automatically calculated by the instrument resistivity.
All test voltage (10 v / 50 v / 100/250/500/1000 v) resistance and resistivity testing results direct reading, removed from the old high resistance meter under different test voltage or different range should be multiplied by the coefficient such as difficult to use.Not only can measure the ultra-high resistance can measure the micro current can also measure the resistivity directly.
Volume Resistivity Tester for Plastic, Rubber, Solid PVC,Surface Resistivity Meter
Technical indicators
1, resistance measurement range: 1×104Ω ~ 1×1018 times.
2, the current measurement range: 2×10-4A ~ 1×10-16A
3. Display square type: digital color screen touch display
4, Built-in test voltage: 10V, 50V, 100V, 250, 500, 1000V
5. Basic accuracy: 1%
6, the use of environment: temperature: 0℃ ~ 40℃, relative humidity <80%
Test voltage within 7, machine: 10 v / 50 v / 100/250/500/1000 v arbitrary switching
8, Power supply: AC 220V, 50Hz, power consumption of about 5W
9, display type: resistance, resistivity, current.
10, input mode: true color 64 bit handwriting touch.
11, display results: resistance, resistivity, current.
12, test requirements: diameter is greater than 100mm(less than this size, the electrode needs to be customized)
Display mode
Large touch color display can read resistance and resistivity directly.Built-in software test system test style optional automatic instrument allocation calculation
Display index: voltage, current, resistance, resistivity and pattern
Standard configuration:
1. Test instrument: 1 set
2. Power cord: 1
3, measuring line: 3 (shielding wire, test wiring, grounding wire)
4, Standard solid single electrode: 1 set
5. Instructions for use: 1 copy