The DINSTAR UC2000 series GSM/CDMA VoIP Gateway is a multi-functional product used to effectively implement the smooth transition between PLMN (GSM/CDMA) and VoIP network. The GSM/CDMA VoIP gateway is designed for comfort, ease-of-use to satisfied necessary of customers. It is not only inherits tradition of quality voice communication over IP network but reduce the human resource of VoIP network deployment. It’s a cost-effective gateway for call termination (VoIP to GSM/CDMA) and origination (GSM/CDMA to VoIP). It is fully compatible with leading Softswitch and SIP servers.
UC2000 series have standard configuration bellow:
UC2000-1G with 1 GSM/CDMA/WCDMA channel
UC2000-4G with 4 GSM/CDMA/WCDMA channels
UC2000-8G with 8 GSM/CDMA/WCDMA channels
UC2000B-8G with 8 GSM/CDMA/WCDMA channels
UC2000B-16G with 16 GSM/CDMA/WCDMA channels
1/4/8/16 GSM/CDMA channels optional
Up to 16 concurrent calls
GSM: Quad-band 850/900/1800/1900MHz
CDMA: 800MHz
IMEI and PIN modified
SMS sending and receiving
USSD, open API for SMS
Flexible dial plan, digit map
Point to Point Protocol over Ethernet (PPPoE) Client Support
Built-in PPPoE client for establishing a DSL link connection with the ISP. There is no need to install a
further PPPoE driver on computers.
Smart QoS
It provides smart QoS feature to provide stable voice quality while users access internet from private LAN to
internet at the same time.
VoIP to GSM/CDMA call termination
It allows up to 16 concurrent calls, terminate calls from VoIP to GSM/CDMA network.
Origination: GSM/CDMA to VoIP
Maximum 16 concurrent calls for each unit, calls from GSM/CDMA network over VoIP.
Fully compatibility
Flexible choice, worldwide GSM/CDMA network usable.
SMS supported
SMS sending and receiving, provides open API interface for third party to develop their own business.
Management & maintenance
Remote SMS recharge ,Hot plug SIM cards, SIM cards ’ PIN protection, easy to maintenance
Flexible number manipulation
Support 32 number manipulation rules ,replace the call prefix and send calls to different ports and port groups
Route management
More then 2 softswitch/SIP server send calls to DWG200x, white & black IP list management
| UC2000-VA-1G | UC2000-VE-4G | UC2000-VE-8G | UC2000-VF-16G |
Interfaces | ||||
GSM/CDMA/WCDMA SIM Ports | 1 port | 4 ports | 8 ports | 16 ports |
VoIP channels | 1 channel | 4 channels | 8 channels | 16 channels |
Network interface | 4*10/100M BASE-TX RJ45 | |||
LED indicators | Power, Run, signal strength indicator, LAN | |||
Voice | ||||
Voice over packet Capabilities | G.168 with 32, 64 or 128 ms tail length | |||
Voice Compression | G.711, G723.1, G.729 A/B | |||
DHCP Client/Server | NAT Router or Switched Mode | |||
Network Protocols | TCP/UDP, RTP/RTCP, HTTP, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP, TELNET, PPPOE, STUN | |||
QoS | Diff Serve, TOS, 802.1P/Q VLAN tagging | |||
Signaling | ||||
DTMF Method | RFC 2833, SIP Info, INBAND | |||
IP Signaling | SIP(RFC 3261) over UDP,MGCP | |||
Provisioning | TFTP, HTTP | |||
Security | ||||
Management | WEB browser, Telnet, Voice prompt | |||
Physical | ||||
Universal Power Supply | Output:12VDC, input:100-240VAC/50Hz | |||
Environmental | Operational:32-104°For 0-40°C Storage:14-140°For -10-60°C Humidity:10%-90% | |||
Dimensions | 113mm×75.5mm×24.5mm | 440mm×380mm×44.5mm | 440mm*380mm*44.5mm | 440mm*410mm*44.5mm |
Weight | 1.6kg | 6.2kg | 6.2kg | 6.5kg |
Additional Features | ||||
Caller ID | Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID | |||
Polarity Reversal | Yes | |||
Homologation | ||||
Safety | UL | |||
Compliance | FCC, CE |