Item | Specification | Unit | VMC850C | |
Work table | Table size | mm | 530*1000 | |
Max load | kg | 600 | ||
T-Slot size (number-width.pitch) | mm | 5-18*90 | ||
Travel | X axis | mm | 800 | |
Y axis | mm | 500 | ||
Z axis | mm | 700 | ||
Travel:Spindle nose to worktable distance | mm | 110-810 | ||
Travel:Spindle center to column block distance | mm | 575 | ||
Spindle | Spindle taper type/ installation size | mm | BT40- ¢150 | |
Spindle speed range | r/min | 100-10000rpm Belt drive | ||
Spindle rating power | kw | 7.5 | ||
Max fast movement speed | X axis | m/min | 20 | |
Y axis | m/min | 20 | ||
Z axis | m/min | 18 | ||
Cutting feed speed | X, Y, Z axis | m/min | 0.005-10 | |
Lead screw spec | X, Y, Z axis | 4010 | ||
Guide way spec/type | X, Y, Z axis | Hardway,Hardway,Hardway | ||
Positioning accuracy | X, Y, Z axis | 0.01 | ||
Repeat positioning accuracy | X axis | mm | 0.005 | |
Y axis | mm | 0.005 | ||
Z axis | mm | 0.005 | ||
Tool magazine | BT40-20T umbrella type | changing tool time(knife to knife) 10 sec(BT40) | ||
BT40-20T arm type | Changing tool time(knife to knife) 4 sec(BT40), 16 sec(servo type) | |||
Max tool weight | 8KG(BT40) | |||
Max BT40 tool diameter | mm | ¢75(all tool in) ¢120(adjacent vacant) | ||
Max tool length | mm | 300 | ||
X,Y,Z axis motor parameter:torque | Nm | 10,12,12 | ||
Bed block height | mm | 80 | ||
Machine protection | Full sealed protection | |||
Power | KVA | 20KVA | ||
Pneumatic pressure | Mpa | 0.5-0.7 | ||
GW | T | 5.3 | ||
Dimension | MM | 2700*2400*2700 |