Vertical Centrifugal Pump Tungsten / Nickle Carbide Bushings and Sleeves
1, Zhuzhou Mingri has the richest molds stock of carbide shaft sleeve from Zhuzhou manufacturer
2, 21 years of stable relationship with our customers
3, The most advanced tooling house
4, The largest production capacity and fastest delivery
5, The most reliable testing machines for all specifications
6, The best and reliable after service
Grade |
Density g/cm3 |
Hardness HRA |
T.R.S Mpa |
Performance&application recommended |
YG11 |
14.4 |
88.5 |
2420 |
Forming or stamping dies for metal powders and nonmetal powders |
YG15 |
14.0 |
87 |
3000 |
It is suitable for drawing steel tubes and rods under high compression ratio,manufacturing upsetting,punching and stamping tools under large stress |
YG20 |
13.5 |
85.5 |
2800 |
It is suitable for manufacturing punching dies for watch parts,leaf spring of musical instrument,battery jars,small sized steel balls,screws,screw caps,etc |
YG16C |
13.9 |
85 |
2750 |
It is suitable for impact-resistant forging dies |
YG18C |
13.7 |
84 |
2800 |
It is suitable for impact-resistant forging dies,hot-forging dies and finishing rollers |
YG20C |
13.5 |
83 |
2850 |
It is suitable for wear resistant or impact resistant dies |
YG22C |
13.3 |
82 |
2900 |
It is suitable for nut forming dies and high impact-resistant dies |
YG25C |
13.1 |
81.5 |
2950 |
It is suitable for stainless screw dies and semifinishing rollers |
Other grades and sizes can be offered as per customers' requirement |
Tungsten carbide sleeve applications is wide, which is a device to protect a class of components. It is in the actual work and the role and purpose of its application environment have a great relationship.
Valve applications, bushings be installed in the valve stem cap trap, in order to reduce the valve leakage, to seal; bearing applications, the use of bush to reduce wear between the bearing and the shaft seat, avoid the gap between the shaft and the hole increases and so on.
Tungsten carbide sleeve production and processing of high-strength, can withstand prolonged load, with high chemical stability, alkali, alcohol, ether, hydrocarbons, acid, oil, detergent, water (sea water), and has no smell , non-toxic, tasteless, non-rust characteristics, its widely used in petrochemical industry for Submerged Oil Pump, slurry pump, water pump, Centrifugal Pump,etc.
1, Soon after the order is confirmed, tungsten carbide sleeve products will start to prepare the RTP powder as per customer’s requirement with our wet-grinding machine
2, Before mass production, we need to do a trial pressing and sintering using every mould, and we check the appearances and the sizes of tungsten carbide sleeve samples with micrometer, projectors etc. to ensure that the requirements of the drawings can be met before batch production
3, Bulk production ,press the raw materials to shape blanks,and all tungsten carbide sleeve blanks must be passed by semi finished inspection,
4, Then sinter blanks to finish (HIP) and finished products inspection, we have 10 sets of vacuum sintering furnace and 2 sets of HIP in the factory ensure the best quality and production capacity.
5, 1). cleaning/tumbling is to make the tungsten carbide sleeve look more beautiful.
2).The tungsten carbide sleeve can be ground according to customers’ order to a tolerance of +/-0.05
step 1, wrapped tungsten carbide sleeve in foam to avoid tungsten carbide sleeve to broke
step 2, put the tungsten carbide sleeve in inner small carton box
step 3, put the inner box into outter carton and fill the carton with foamed plastic
step 4, wrap the carton with packaging tape
step 5, you can choose any delivery way such as DHL,TNT,UPS ect.
Our company have 230 workers, 8000 m2 non-dust workshop, 10000 sets mould, 10 workshop included grinding powder workshop, pressing workshop, sintering workshop, processing workshop, mould production workshop, production capacity 50tons/month, well-known brand ”Ri Xin” has registered in Europe for 9 years , ISO certificated, one hour reach Shanghai port, this is how we keep superior quality and competitive offers for global valued customers.
Our main products cover cold heading dies, wire drawing dies, strips and plates, saw tips, brazed tips, disc cutters, round rods, rock drilling bits and buttons, milling tools, also we can make all kinds of customized proposal to meet customers’ requirement.
1. We joined Alibaba Trade Assurance to make sure the buyer’s benefit. If can’t meet the details in the contract, 100% of your payment will be returned.
2. As a professional manufacturer, we have 21 years factory experience for tungsten carbide sleeve. We are devoting to the research and manufacturing of many different type and size.
3. You can see from the below picture that many customers visited our exhibition booth, more and more customers in the world are using our tungsten carbide sleeve , we received many good feedbacks or reviews from lots of countries.
Contact us