Parameters for dental moulding resin | |
Model | VAN-LDM |
Color | grey/earthly yellow |
Smell | Slight |
Appearance | Liquid |
Alcohol solubility | Easy to soluble in ethanol |
Water solubility | Slightly soluble in water |
Viscosity | 100-50(25℃,m.pa.s) |
Bending modulus | 1.882-2.385Mpa |
Bending strength | 59-70Mpa |
Heat distortion temperature | 120℃ |
Heat expansivity | 95*E-6 |
Volume shrinking percentage | 3.72%-4.42% |
Line shrinking percentage | 1.05-1.35% |
Tensile strength | 36-52Mpa |
Tensile modulus | 1.779-2.385MPa |
Breaking elongation | 11%-20% |
Shore hardness | 87D |
Vitrification temp | 180℃ |
Density | 1.05-1.13g/cm³ |
Notch impact strength | 44-49j/m |
Features | High temperature resistance, scratch resistance |
Application industry | For dental orthodontics, invisible braces moulding and other moulding |