2018 Vacuum Emulsifying Mixer for Cosmetic lotion cream detergent liquid soap production line
Machinery Introduction:
MZH-V5L Eye cream and sample products making equipment is composed of emulsification boiler (fluctuating cover, overturn kettle form or outside circle form), water boiler, oil water, vacuum system, heating and temperature control systems, cooling systems, electric machinery control systems. etc..
Work Elements:
After the materials are in the water boiler and oil boiler to heating & mixing then draw into the emulsification boiler by the vacuum pump, through the middle(fixed) stirrer & teflon Scrapers residues stirrer in the emulsification boiler that sweep the residues on the wall of the boiler, so make the produces of wiped off become the new interface constantly, then the blade cut off ,compress,fold round ,mixing and running to the homogenizer, according to the high shear wheel and the cutting case to strong cutting off,impact,Without rules mobility, etc. the material by cutting in the cut interstices and turn to a particle of 200nm-2um prompt, because the emulsification boiler is under vacuum state, the bubble that the supplies produce in the course of mixing is taken away in time.
Features:
MZH-5L Eye cream and sample products making equipment is automatic rising type, the material was directed draw into the emulsifying boiler from oil boiler and water boiler based on a pipe that is under vacuum, the discharge is based on the turn the emulsifying boiler. And the heating system is electric heating or steam heating that the temperature is automation control. Put the cool water into the intercalated bed so cooling the material, simple operation and safety( at the outside have a warm layer). The homogenizer and the blade stirring can together work or separate work.. the material sliming,emulsification,mixing,dispersing,etc. what will finished during short time. Contact position adopt high-quality stainless steel (medical use adopt 316L material make with supplies, the polishing of surface of the mirror of interior surface, mix the hygiene of the device in vacuum, it accords with the normal hygiene standard manufacture of GMP to adopt that is most ideal production equipment.)
Technical parameters:
Model |
MZH-V5L |
MZH-V10L |
Main Boiler |
6.25L |
12.5L |
Water Tank Volume |
5L |
10L |
Oil Tank Volume |
2.5L |
2.5L |
Main Boiler Jacket Material & Thickness |
Inside:316L(3mm) Mid:304(3mm) Outside:304(3mm) |
|
Water Tank Volume & Thickness |
Inside:316L(3mm) Mid:304(3mm) Outside:304(2mm) |
|
Oil Tank Power Volume & Thickness |
||
Blender Material & Thickness |
SUS316L(thickness : 6mm) |
|
Platform Material & Thickness |
304(thickness : 4mm) |
|
Safty Guardrail Material & Thickness |
304(thickness: 1.5mm round pipe) |
|
Speed of Scraping Plate Blender |
0-63r/min |
|
Speed of Homogenizer |
0-3600r/min |
|
Temperature of Emulsifying Pot |
≤120 ℃ |
|
Blender Motor |
0.37KW |
0.75KW |
Homogenizer Power |
0.75KW |
1.1KW |
Water Tank Power |
0.37KW |
0.37KW |
Oil Tank Power |
0.37KW |
0.37KW |
Vacuum Pump Power |
0.75KW |
0.75KW |
Heating Pipe Power |
3KW |
6KW |
Vacuum of Emulsifying Pot |
-0.09Mpa |
|
Pressure of Jacket |
normal pressures |
|
Voltage |
50-60Hz 380V±10%-15% |
|
Grass Weight |
about 200KG |
about 250KG |
Overall Dimension |
1.24*0.65*1.35 m |
1.25*0.75*1.35M |
1. Q: Are you factory or trading company?
A: We are the professional manufacture of cosmetic machinery in China over than 10years
2. Q: Where is your location?
A: Company and Showroom located in Guangzhou china, Factory located in Jiangsu and Shanghai Province.
3. Q: Are your engineer be able to serve in oversea?
A: Yes, we have a lot of experience install the machine in oversea.
4. Q: What is your material of your product?
A: adopt with full stainless steel 304-2b and 316L
5. Q: How does your factory do regarding quality control?
A: Two years spare parts,and full-life service of our machinery.
Our Company to customer satisfaction for the development of three goals: product quality, product technology and after-sales service!