KEY | Fuction description | ||
PRG/ESC | Press this key to enter the programming mode,press again to ESC. | ||
DATA/ENT | Press this key to enter next menu or comfirm data. | ||
NUMERICAL MODIFICATION KEY | Short press this key,then the numerical value will change gradually.Long press this key,then the numerical value will change rapidly. | ||
QUICK/JOG | Press this key and hold on,will operate in jog mode,release will go back the mode before jog mode | ||
SHIFT | When modifying parameters,use this key to modify the parameters,Under the stop display interface or operation interface,the display parameters can be shift by this key. | ||
RUN | Keyboard control mode,start the inverter running. | Press RUN and STOP key in the same time when inverter running,the inverter will stop freely. | |
STOP/RESET | Keyboard control mode,stop the frequency converter operation,Returns the parameter setting state from the fault state. |
Items | Description | ||
Product Name | VFD ac motor drive 20hp 3 phase 380v 15kw frequency inverter | ||
Model | G500-015G/018P-4TB | ||
Power Input | Power | 15/18KW | |
Rated Voltage | 3phase;380V~480V±10% | ||
Rated Frequency | 50~60Hz,±5% | ||
Maximum Frequency | 0~600Hz,0~3000Hz Can be customized according to the requirement | ||
Carrier Frequency | 1.0Khz~16.0Khz Carrier frequency can be automatically adjusted | ||
Input Frequency Resolution | Digital setting:0.01hz Analog setting:0.1Hz | ||
Control Mode | No speed sensor vector control, no speed sensor vector control 1, V/F control, torque control | ||
Application | variable frequency drive | ||
OEM | Acceptable |
G500 Standard built-in braking unit series frequency inverter
Inverter Model | Input voltage/V | Rated Output/KW | Rated Input Current/A | Rated Output Current/A | Adaptation Motor/KW |
G500-0R7G-4TB | Three phases 380~480V | 0.75 | 3.4 | 2.5 | 0.75 |
G500-1R5G-4TB | 1.5 | 5.0 | 3.7 | 1.5 | |
G500-2R2G-4TB | 2.2 | 5.8 | 5.0 | 2.2 | |
G500-004G/5R5P-4TB | 4.0/5.5 | 10/15 | 9/13 | 4.0/5.5 | |
G500-5R5G/7R5P-4TB | 5.5/7.5 | 15/20 | 13/17 | 5.5/7.5 | |
G500-7R5G/011P-4TB | 7.5/11 | 20/26 | 17/25 | 7.5/11 | |
G500-011G/015P-4TB | Three Phases 380~480 | 11/15 | 26/35 | 25/32 | 11/15 |
G500-015G/018P-4TB | 15/18.5 | 35/38 | 32/37 | 15/18.5 | |
G500-018G/022P-4TB | 18.5/22 | 38/46 | 37/45 | 18.5/22 |
PROJECT | SPECIFICATIONS | ||||||
POWER INPUT | RATED POWER | 3 phase: 380V~480V;The voltage fluctuates continuously 10%,and the transient fluctuatio-15%~+10% is 323V~528V.Voltage imbalance rate <3%,distortion rate to meet the requirements of IEC61800-2 | |||||
RATED INPUT CURRENT | See table G500 converter series models | ||||||
RATED FREQUENCY | 50Hz/60Hz,fluctuation rang 5% | ||||||
THE POWER OUTPUT | STANDARD APPLICABLE MOTOR | See table G500 converter series models | |||||
NOMINAL CAPACITY | See table G500 converter series models | ||||||
RATED CURRENT | See table G500 converter series models | ||||||
THE OUTPUT VOLTAGE | Output 3 phase under rated input condition,0~rated input voltage,error less than 3% | ||||||
THE BASIC FUNCTION | THE HIGHEST FREQUENCY | 0~600Hz,0~3000Hz can be customized according to customer demand | |||||
CARRIER FREQUENCY | 1.0kHz~16kHz,carrier frequency can be automatically adjusted | ||||||
INPUT FREQUENCY | Digital setting: 0.01Hz;Simulation setting: 0.1hz | ||||||
THE CONTROL MODE | No speed sensor vector control,no speed sensor vector control 1,V/F control, | ||||||
STARING TORQUE | 0.5hz/150% | ||||||
OVERLOAD CAPACITY | Model G,rated current of 150% for 60 seconds;180% rated current 10seconds Model P,120% rated current for 60 seconds;150% rated current 10 seconds | ||||||
TORQUE INCREASE | Auomatic torque lifting;Manual torque increased by 0.1%~30.0% | ||||||
ACCELERATION DECELERATION CURVE | Straight line or s-curve acceleration and deceleration mode.The four acceleration and deceleration time ranges from 0.0 to 3600.0s | ||||||
DC BRAKE | Dc braking frequency:0.00hz~maximum frequency, braking time:0.0s~50.0s, braking action current value: 0.0%~120.0% | ||||||
INCHING CONTROL | Inching frequency range:0.00Hz~500Hz.The inching acceleration time is 0.0s~3600.0s | ||||||
SIMPLE PLC,MULTI-SPEED OPERATION | Through the built-in PLC or control terminal to achieve up to 16 segments of operation | ||||||
BUILT-IN PID | The closed loop control system of process control can be conveniently realized | ||||||
AUTOMATIC VOLTAGE REGULATION(AVR) | When the network voltage changes, the output voltage can be maintained constant automatically | ||||||
CURRENT | When the operating load of VF changes, the output current will be automatically limited to prevent over-current tripping, so as to realize the feature of "backhoe" | ||||||
FAST CURRENT LIMITING FUNCTION | Minimize overcurrent failures and protect the normal operation of the converter | ||||||
DYNAMIC OVERVOLTAGE SUPPRESSION | When the operating frequency changes, the energy feedback is automatically | ||||||
OSCILLATION SUPPRESSION | Optimize VF oscillation suppression algorithm to realize VF stable operation | ||||||
PERSONAL IZED FUNCTION | INSTANTANEOUS STOP CONSTANTLY | In the case of instantaneous power failure,the inverter can be kept running for a short time by reducing the compensation voltage of load feedback energy | |||||
V/F SEPARATION CONTROL | Voltage and frequency can be independently adjusted | ||||||
MULTITHREADED BUS SUPPORT | Support a variety of field buses: Modbus, profibus-dp, CANopen | ||||||
FAN CONTROL | Fan operation can be controlled to increase fan life |
Applicable industries | Applicable machines type |
Fan industry | Centrifugal fan, axial fan, roots fan, oblique flow fan, cross flow fan |
Machine tool industry | CNC machine spindle, vertical lathe spindle, surface grinding spindle, boring spindle, sawing motor |
Plastic industry | Extruder machine, injection molding machine, shoe machine, internal mixer machine, granulator machine |
Water pump industry | Petroleum pumps, metallurgical pumps, chemical pumps, fishing pumps, mining pumps, electric pumps, water pumps, water treatment pumps, food pumps, pharmaceutical pumps, oil refining pumps, paper pumps, textile pumps, printing and dyeing pumps, water supply pumps, etc |
Coal mining industry | Coal vibrating screen, downhole air draft, air supply system, tractor machine,traction machine, desulfurization fan |
Air compressor industry | Screw air compressor, piston air compressor, centrifugal compressor, linear compressor |
Textile industry | Circular loom, rapier loom, double twisting machine, centrifugal dewatering machine, carding machine, industrial washing machine, high temperature dyeing machine, printing and dyeing machine mercerizing machine, jig dyeing machine , etc |
Boiler blower, induced draft fan, boiler feed pump, circulating water pump, condensate pump, cooling tower feed pump, mortar pump, coal feeder, etc | |
Ceramic industry | Ball mill, arc polishing machine, CNC cutting machine |
Chemical industry | Mixing machine, Drying machine, blown film machine, plastic crushing machine, flour mill |
Petroleum industry | Pumping unit, oil delivery pump, plunger pump frequency control , Gas pipeline system ventilation |
Crane industry | Mine hoist, mine winch,pile driver, travelling crane, tower crane, construction lifts |
Conveyer belt | Belt conveyor, slab conveyor, trolley conveyor, escalator, moving walkway, scraper conveyor, bucket conveyor, suspended conveyor,aerial ropeway, etc |
Iron and steel industry | Blast furnace dust removal fan, hot rolling mill, drawing Machine, etc |
Q1: Are you a manufacturer or trading company?
A: We are a manufacturer of frequency converters.
Q2:Do you provide samples ?
A: Yes, sample order is available for quality check and market test. After we receive the sample charge, the samples will be delivered.
Q3: Can you accept to use our logo?
A: we accept OEM production.
Q4: What's your delivery time?
A: It depends on the specific products and the quantity you need. Generally it is 7-15days if the goods are in stock. or it is 10-20 days if the goods are not in stock, it is according to quantity.
Q5:How can i get the after-service?
A:We' have more than 10 years experience in this field. If there's any problem, please feel free to contact us, we'll provide suggestion from our engineer to help you solve the problem.
Q6: What is your terms of payment ?
A:We accept T/T, L/C,paypal, western union,etc.The details you can discuss with us.
Q7:Do you provide warranty for the goods?
A: Yes, we provide 18 months of warranty for all the goods from us.
Q8: How about your products quality inspection?
A: We have professional QA and QC teams, 100% quality inspection is performed before goods out of factory.
Q9.Is your company certified?
A: We have CE,IOS9001, CQC, Patent Certificate.