1. Input power supply 3PH 380V (±25%); output: 3PH 0-380V 2. Dedicated DSP motor main control IC, voltage vector control, pureSVPWM output
3. The IPM module is the core component of the power drive with built-in reliable protections such as over-current,short-circuit and over-temperature; the failure rate is extremely low
4. Five-digit digital tube display, five status indicators(display for frequency, voltage, speed, counter, forward and reverse status, fault, etc.)
5. The output frequency range is0.1-400HZ, accuracy: 0.1HZ
6. Analog input 0-5VDC, 0-10VDC, 0/4-20mA
7. Digital operation panel can be connected with extensioncord, and parameters can be copied freely
8. X5, X6 multi-function input terminals can be set with multiple start and stopmethods: two-wire A, B mode, three-wire A, B mode
9. X1-X4 multi-function input terminals can be combined with 16 speeds,16-segment acceleration and deceleration time (0.1-6500 seconds) can be set independently
10. The user can set the V/F curvearbitrarily
11. Multi-function relay output, realize relay output in various states such as running, frequency reaching, external
abnormality
12. Instantaneous power failure restart speed tracking function, automatic voltage stabilization function, DC brake,
PLC program control and other functions
13. The drafting function is suitable for unwinding and unwinding, keeping the linearspeed constant within a certain accuracy, etc.
14. Perfect protection function: overvoltage, undervoltage, overload,overtemperature, output short circuit protection
15. Parameter password protection, limited use time, automatic parameter recovery