E1 to V.35 and Ethernet to V.35 Converter

Model: LNK-2705 Series

Overview

The Ethernet to V.35 Converter provides conversion from V.35 to Ethernet, is a good performance, self-study long-distance Ethernet bridge. It is of small volume and low cost and is very suitable for connection application which needs low cost equipment. It can be also used as an extender of LAN.  V.35/Ethernet converter is the device which can realize the convert between the V.35 interface and Ethernet interface. It is widely used in data communication such as the connection between the Base band modem and LAN. It is used in pairs.

Features

• Completely compatible with IEEE 802.3/EthernetV.2;
• WAN circuit interface:V.35,rate auto-adaptable 0~100Mbps;
• circuit transmitting agreement:HDLC;
• rate of filter and transmitting reaches 15,000frame/s;
• 256 frame buffer;
• 10,000 MAC address LAN table;
• auto-study and update function;
• supports DTC and DCE, external clock and internal clock

  Application

Technical Indexes

V.35 to Ethernet converter Technology Characteristics
DTE V.35 interface, the spe ed follow the clock of DCE and up to 10Mbps.
 A V.35 interface transceiver phase-free transfer feature, in most cases do not have to adjust phase control switch (SEL:3-4)

V.35 to Ethernet converter Interface Parameters

Ethernet Interface:
   Fully IEEE 802.3 (2000) compliant
   Cross and parallel reticle automatic recognition
   10Mbps,100Mbps, full duplex and half duplex adaptive

V.35 Interface:
   Interface Mode : DTE
   Interface Type : DB25
   Rate : 0-10Mbps

V.35 to Ethernet converter General characteristics
Power : 220V±20% , -36 ~ -72V
Power Consumption : < 5W
Environment Temperature : 0-50
Size : 220×175×35mm
Net Weight: 750g

Packing List
V.35/Ethernet Protocol Converter
One Power cord (Note: -48v no with power cord)
One conversion cable of DB25-M34
Manual book