Used hydraulic oil filter machine waste lube regenerate separator
Filter the new oil, and pump the oil from oil storage tank to systematic oil tank. Purify the oil being used, and improve the performance of oil filtration. The filter can be used in the refined purification for hydraulic oil, gear oil and lubricating oil, break the emulsified structure, remove the water.
Name | Diesel Filtrator |
Model | JY-H330 |
Brand Name | JINGYUAN |
Place of Origin | Liaoning , China (Mainland) |
Flow Rate | 30~40 L/min (Depends on the viscosity and temperature of oil) |
Filtration Precision | 2~20μm (According to system requirements) |
Filtration Material | Jingyuan Polymer Membrane Material Various types,and can be used repeatedly after washed |
Working Pressure | 0.2~0.35 Mpa |
Working Temperature | -10~70℃ |
Suitable Oil | Hydraulic oil, engine oil, gear oil, steam turbine oil, transformer oil( Petroleum or mineral base oil) |
Voltage | 380V (Continuously work for long time) |
Measurement | 1160*450*1000mm |
Weight | 148Kg |
Guaranteed to Provide Clean Oil Filtration Systems ( membrane separation , Microfiltration )
Filtration & Separation Solutions for : Solid Particulate and water removal Suitable for : Hydraulic oil , engine oil , gear oil ( Petroleum or mineral base oil ) and lubricating oil
Function : Its design makes it ideally suited to removing reliably in a single-pass 98% of contamination and free & emulsified water to less than 2 ppm , thereby guaranteeing the required cleanliness
Filtration Necessity :
Jingyuan Industrial filter cart is the ideal way to pre-filter and transfer fluids into reservoirs or to clean up existing systems . Fluid should always be filtered before being put into use .
Solid particle pollution leads to the failure of hydraulic system and lubricating system , so it is necessary to filter the Industrial oil before pour it into system . New fluid Is not necessarily clean fluid . Most new fluids ( right out of the drum ) are unfit for use due to high initial contamination levels . Contamination , both particulate and water , may be added to a new fluid during processing , mixing , handling and storage.
Applications :