SPECIFICATION OF JOHNDEERE C110 | |||
Model | C110 | ||
Harvester Cutting (m) | 4.57mm | ||
Feeding capacity(kg/s) | 7(rice) | ||
Total loss rate(%) | less than 1.2(wheat) less than 3.0(rice) |
||
The damage rate of the harvester(%) | less than 1(wheat) less than 1.5(rice) |
||
impurity content(%) | less than 2.0(wheat) less than 2.0(rice) | ||
Ground clearance(m) | 0.482 | ||
Threshing device type | bar type, nail tooth | ||
Threshing cylinder diameter X width(m) | 0.61x1.02 | ||
Separating device type | Plate type longitudinal single axis separate roller | ||
Separation area(m2) | 1.62 | ||
Cleaning device | double-layer vibrating wind type | ||
cleaning area(m2) | 3.4 | ||
Grain volume(m3) | 4.2 | ||
Grain Unloading | Hydraulic closed unloading | ||
Engine power (kw/hp) | 116/158 | ||
Engine manufacture | John deere | ||
Engine Model | JD4045HYC08 | ||
Transport size(m) length x widthxheight | 7.4x4.9x3.4 | ||
complete machine wight Without cutting table contain chopper(kg) |
9000 | ||
Walking type | wheel type | ||
Walking speed(km/h) | 1.05-19.7(Forward) 2.40-5.55(backward) | ||
Drive / steering tire tread(m) | 2.6 | ||
Optional | Hydraulic driven walking device, high flower tire, roller reducer |